<p><strong>SOMADA Floating Shelf Bracket Hardware Kit - 8 Inch, 4 Pack</strong></p><p>Our peg bracket design allows for easier flush installation compared to other brackets in the market. Our bracket rod is in the center of the bracket plate to make it easy to hide them. The design works with a standard 2x10 or 2x12 lumber from the local hardware store to convert into an invisible shelf. Bracket rods have an indentation and come with screws for secure installation.</p><p><strong>What is included in the package:</strong></p><p>4x Heavy duty steel brackets 8 inch long / 20 cm long</p><p>8x Drywall anchors and screws</p><p>8x Brick wall anchors and screws</p><p>8x Small screws to secure the shelf</p><p>1x Installation guide</p><p><strong>How to Install Invisible Shelf Brackets or Blind Shelf Brackets:</strong></p><p><strong>STEP 1 - </strong>Apply masking tape using the level to ensure it is horizontal. Find studs in the wall using a stud finder. Mark the holes using the included template with a pencil. </p><p><strong>STEP 2 - </strong>Drill pilot holes for the screws. Remove the masking tape and save for the later step. Mount the brackets using a power drill and/or a manual screwdriver. </p><p><strong>STEP 3 - </strong>Apply the masking tape to the shelf. Drill the ½ inch diameter holes in the shelf at the mark using ½ inch auger drill bit for wood. </p><p><strong>STEP 4 - </strong>Mount the shelf on the brackets by sliding. Secure the shelf using small screws against brackets. Sit back and enjoy it!</p><p><strong>Buy today with full confidence! Contact us for any questions via amazon. </strong></p>