Product Descriptions:
Most lab water systems require the inlet water pressure to be less than 60 psi (0.4 MPa). For pure to ultrapure water system, water inlet pressure is better below 4 psi (0.03 MPa). This device is used to reduce inlet water pressure to a lower setting. Connecting with 8mm OD tubings.
Parameters:
- Dimensions: 80mm (wide) x 90mm (high)
- Weight: 200g
- Inlet Diameter: 5/16 in (8mm)
- Oulet Diameter: 5/16 in (8mm)
- Meter Pressure Range: 0.05-.035 MPa (0.5-3.5 bar)
- Maximum Ajustable Pressure: 0.35 MPa (3.5 bar)
- Maximum Tolerable Pressure: 1.0 MPa (10 bar)
- Wall mount: Wall-mountable
Suitable for the following Millipore systems:
Milli-Q Acamedic
Milli-Q Biocel
Milli-Q Gradiant
Milli-Q Synthesis
Milli-Q Plus
Milli-Q Advantage A10
Milli-Q Reference
Synergy
Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.