What you will get; You will get 1 seal kit that will rebuild either tilt cylinder with a 2" bore on a Shaver HD-10 post driver. These seals are intended for the inner gland, the outer gland, the piston and the seal underneath the piston. There is also a wiper seal included that will mount into the outward portion of the gland next to the circlip or snap-ring. You will only receive what is inside the red box outline in the photo. The components of the cylinder are shown with new seals installed for your reference only Note: The Shaver HD-12 post driver comes with tilt cylinders that have a 2-1/2" bore. These seals are not intended for a HD-12 post driver.