Features:

3Phase brushless, permanent magnetic rotor, maintenance-free, long life

Can stand high temperature 100 degrees Celsuis, continuously pumping boiling water

Locked-rotor and reverse connection circuit protection, automatic overload protection

Soft-start with low in-rush current, suitable for direct solar panel connection

Small size, high efficiency, low consumption, low noise

Stator and circuit board sealed by epoxy resin, completely water proof

Sleeve and shaft with carbon fiber materials, better performance than ceramic and metal materials

Specifications
NO.	Item	Specs
1	Dimension and weight	100.5mmx95.5mmx69.6mm;480g
2	External diameter of outlet	14mm
3	External diameter of inlet	14mm
4	Driving mechanism	Brush-less, magnetic isolated design
5	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6	Condition of use	Can continuously work, submersible or land use (not self-priming)
7	Suitable medium	Water, oil, or normal acid/ alkaline liquids
		(Pre-test needed for special liquid)
8	Max working temperature	100C
9	Power consumption	86.4W
10	Rated voltage	24Vdc
11	Working voltage range	5Vdc ~ 24Vdc
12	Max load current	3.6A (for S sub-series)
13	Max horizontal flow rate	1380LPH (for S sub-series)
14	Max static lift	16M (for S sub-series)
15	Noise class	IP68(suitable for submersible installation)
16	Waterproof class	Can be more than 30,000hrs
17	Life span	Can be suitable solar panel, batteries, adapter or other power source
18	Power supply	dry-run protection, lock protection(customized function)
19	Power regulation function	IP68(suitable for submersible installation)
20	Feature	Ssmall size with high efficiency,maintenance-free
		Use ceramics shaft and carbon fiber sleeve
		Completely water proof (IP68)
		Brush-less dc control without pollution, long life span
		OEM and ODM service accept
		Offer Pump related control system design

Caution - some notes you must concern!

1. The positive pole is red or brown wire; the negative pole is black or blue wire.

2. Overvoltage, reverse wiring will burn the motor.

3. Confirm your power voltage before connecting the pump, to ensure that it works under the rated voltage.

4. BLDC pump is not self-priming pump. It must be installed under the liquid level or completely submerged in the liquid.

5. Keep the water clean, prohibiting impurities from entering the pump. Some device such as filter will be useful.

6. Dry operation (operation without liquid in the pump) will damage the pump.

7. Head means water's height inside of a pipe, not the spraying height.

8. Flow rate is horizontal rate, if you need a certain height, the flow rate will be reduced.

9. When the head is at the max height, the flow rate will be zero. Choose the suitable pump refer to our Performance Curves.

10. Ensure the water clear, regular checks can increase pump's lifespan.

Package included:

1pcs x  DC50K-24160S 24Vdc micro hot water circulation pump (Not Power supply is included)