This is a NEW PH 220 Style High Frequency Horn made by Adam Hall as Model NUmber LD-H99C       

MESSAGE US with any questions!!! 
Speakersandamps dotcom

We have many more of these, but EBay only lets us list one at a time.

We have most models by many pro Speaker manufacturers

in stock or can get them for you for dealer cost.

         Similar to P Audio PH 220 Horn Flare

Made of Aluminum and black Weather resistant paint with aluminum base horn face trim ring around the perimeter of the horn face.

TYPE: Constant Directivity         

THROAT SIZE:  1", 25mm         

         

DISPERSION:  90 x 75        

Low Recommended X-OVER: 1.2 kHz         

WxHxD:  8.7" x 8.7" x 5.2"            

WxHxD:  235 x 235 x 132mm         

The PH-220/LD-H99 is a fully rotatable, medium format high frequency horn. Because the horn mouth is square, the horn may be rotated to optimize coverage based on the acoustic environment. The radiation pattern is a nominal 90 degree by 75 degree. The square horn mouth allows the pattern to be either a 90 degree horizontal by 75 degree vertical coverage pattern or a 75 degree horizontal by 90 degree vertical pattern. The mouth area is large enough to provide excellent acoustic loading to below 1000Hz.P

Weight:  1.0lbs, 500 g

The PH-220 features a 1 inch (25.4mm) throat diameter. The moun- ting configuration is bolt on style and is compatible with many of the P Audio PreNeo and BMD series professional compression drivers. The horn mouth dimensions allow the PH-220 to be used in a wide variety of professional applications such as two way and three way high level sound reinforcement systems as well as near field reinforcement de- signs. The PH-220 is also ideal for stage monitoring applications.

The PH-220/LD-H99 is a rugged die cast aluminum design and is coated in a non reflective black paint. Because the horn utilizes an industry stan- dard 1 inch bolt on connection for the compression driver, the PH-220 may be used with a wide variety of competitive compression drivers as well. Good acoustic loading allow the horn to be used down to 1200Hz.

The PH-220/LD-H99 may be used with most professional 1" throat compression drivers. ( or any industry standard compatible driver )