PLEASE READ before your purchase.
Please select "Color" and see photos.
Slow RGB means the LED is a slow color changing light that cycles through colors. There is a video on this listing showing all four controller ports and power having slow RGB.
Condition: Used. Cleaned and Tested and in good working condition. Memory card slot flaps & springs are not included.
FYI, Purple LED is dimmer than other LED color due to the nature of LED light.
To install this unit, you will need a 4.5mm gaming screwdriver. Once you unscrew 4 screws on the bottom of the console, remove top shell, then you can replace controller port that is connected with a ribbon cable. Please make sure it is inserted right. At this point, you can plug AC adapter and turn it on to see if it is working or not. Once you confirm it is working, you can put the top shell back and screw back on.
Caution: when you put the top shell back, make sure the lid is open. Once top shell is align to the bottom part of the shell completely, then you can close the lid. Without doing this may cause breaking the reset switch inside of the console.
If it doesn't work upon arrival, please let me know. I will take full responsibility for non-playable console.
Free Shipping within US