Custom designed, Acrylic & 3D Printed Mini Desktop Case fits Raspberry Pi 4 + Ice Tower Cooler This is for the CASE ONLY. Pi, Ice Tower Cooler, power supply, accessories, and Geekworm board are NOT included. Pi and Ice Tower Cooler shown in pics for demo only.  40 x 10 fan, screws, and rubber feet included.  I custom design and print cases for the Raspberry Pi 4 with Ice Tower Cooler setup. Case works with a Raspberry Pi 4 and an original Ice Tower Cooler and optionally with a Geekworm second generation M.2 drive board (X873 v1.x and X862 v2.x). Using the m.2 drive board will require removing the port access hole with an X-acto knife. There is an outline on the inside of the case to use as a cutting guide. This case has a secondary fan with a duct to blow cooling air on the RAM and PCB. This one of a kind case design is crafted with the top and 2 sides in orange acrylic. Front, back, bottom, and rails are printed in in Jayo Gold PLA+.   Rails on bottom fit a 2.5" SSD or laptop hard drive up to 9mm thick.  Assembly instructions are more information can be found on my youtube https://www.youtube.com/watch?v=jYk4cRhk6hs&t=368s If you have any questions, please let me know. Thanks for looking.