XIEGU G90

HF PORTABLE OR BASE HF TRANSCEIVER

MAIN FEATURES

• High performance front end narrowband ESC preselector
• Frequency range of 0.5~30MHz
• Modes: SSB/CW/AM
• Large colour TFT LCD screen
• ±24k bandwidth spectrum display with waterfall
• Software defined narrowband filter (CW mode: 300Hz)
• Detachable Front Panel/Display Unit
• Up to 20W of RF power
• Built-in wide range automatic antenna tuner
• I/Q output for interfacing with a PC or XDT1 Panadaptor

XIEGU G90 RECEIVER SPECIFICATIONS

• RX frequency range: 0.5MHz to 30MHz
• Modes: SSB/CW/AM
• RX sensitivity: better than 0.25uV @12dB Sinad (PRE: ON) Machine dynamic range: 90dB
• Adjacent channel suppression: 60dB
• Audio output power: 0.5W@ 4Ω
• Standby current: 750mA @ Max

XIEGU G90 TRANSMITTER SPECIFICATIONS

• Frequency range: 1.8 to 30 MHz (Amateur Bands only)
• Modes: SSB/CW/AM
• RF output power: 20W
• Spurious suppression: ≥50dB
• Carrier suppression: ≥50dB
• Sideband suppression: ≥50dB
• Transmit working current: 8A @ Max

XIEGU G90 ANTENNA TUNER SPECIFICATIONS

• Initial tuning time: ≤12s
• Re-entry tuning time: ≤ 2s

XIEGU G90 GENERAL SPECIFICATIONS

• Operating voltage range: 12 ~ 15V DC
• Operating temperature range: 0 ° C ~ 55 ° C
• Frequency stability: ±2ppm (after 30 minutes of power on)
• Size: 120*45*210 mm (without protrusions, head unit combination status)
• Weight: about 1kg

THE XIEGU G90 IS SUPPLIED WITH THE FOLLOWING ACCESSORIES

• 1 x Xiegu G90 Transceiver
• 1 x Multi-function Microphone
• 1 x USB CAT and Firmware Cable
• 1 x DC Power Cable with fuse
• 1 x DB-9 remote head cable
• 1 x Operation Manual
• 1 x Warranty Card
• 1 x Quality control card
• 1 x Hex key
• 2 x Front extension handles
• 2 x Rear extension ha