Remote Frequency : 303.8Mhz, FO21 Key Blade (uncut), 4D60 Transponder chip, New quality lithium Battery fitted
Note: With most models when programming the transponder chip will convert to 62 chip during programming
You can program the key yourself with the procedure below if you have 2 working original Ford keys.
If you have one key only then a Locksmith will need to program the transponder chip using a scan tool.
Program the remote first with instructions written bellow.
After programming the remote, get the key cut and programmed by your local locksmith to start the car, or use the procedure bellow to program it yourself if you have two working keys.
Remote Programming Procedure
Sit in the car with the doors closed
Insert key and Turn the ignition to the ACC position and press the rear window demister button 3 times, within 5 seconds.
You then press a button on the first remote to be trained , the door locks will cycle.
Then press a button on the 2nd to be trained and the door locks will cycle again.
5. Repeat this step for the the rest of the remotes to be trained to the car.
The first keypad trained will result in one door lock cycle, the second will result in 2 door lock cycles, and so on.
There is a limit of 8 remotes per car.
Turn the ignition to the OFF position to exit the learning mode.
Your remotes are now programmed to your car.
Programming procedure for Transponder key
2 working keys are needed
Ensure you have all keys present during recoding as any key not present will be removed from the memory.
1. Sit in the drivers seat with all doors closed and put the first coded key into the ignition & turn to the ACC position.
2. Now turn this key to the OFF position & remove the key.
3. Within 5 seconds put the 2nd coded key into the ignition & turn this key to the ON position.
4. Turn this key back to the OFF position and remove the key.
5. The door locks will then cycle to indicate that the learning mode is active.
6. Within 5 seconds put the new 3rd or new key into the ignition & turn to the ON position.
7. The door locks will cycle 3 times to indicate the 3rd key has been trained ,
ensure you wait for the locks to finish cycling before turning the key to the OFF position.
8. Repeat this step for any following keys , The 4th key trained will cycle the locks 4 times,
and so on. you can train up to a maximum of 8 keys.
______________________________________________________________________________________________________
Australian owned and operated, STC auto keys are Leading industry experts in automotive car keys.
Supplying genuine dealer keys and the highest quality aftermarket keys to suit most vehicles at wholesale prices since 2006.
All products are 100% tried and tested and guaranteed to work.
Orders are shipped for free from our warehouse in Melbourne via Australia post.
If you need orders urgently we recommend you purchase express post in the checkout for an extra charge.
