** NEW ** Racetune Solid Shifter Bushes for Remote Tripod Transmissions
You are bidding on 1 SET (6 BUSHES) in Gold or Black Anodized finish.

Shifter feeling sloppy and not accurate? 
Can't get into 3rd from 2nd properly or are you crunching gears? 
Chances are your shifter bushes are flogged out after 15-20 years of driving!
Factory bushes are nearly impossible to find in stock world wide. 

We have engineered a unique solution with the ease of installation with basic hand tools - NO PRESS REQUIRED!

Restore that precise shifting feel without any added noise or vibration harshness. 

Guaranteed Fit for the following Remote Shifter Gearboxes:
  • JZA80 Supra 6spd V160 V161 Getrag Remote Box 
  • JZA80 Supra 5spd W58 Suit Toyota Remote Box
  • JZZ30 Soarer 5spd R154a R154 Suit Toyota Remote Box
  • Suit Toyota Chaser with R154a R154 Remote Box

The Racetune Bush Kit replaces all 3 Bushes on the Remote Shifter Tripod with solid Billet Aluminium 6061-T6 CNC machined bushes. 
The factory rubber bushes are usually flogged out and not centered anymore. 

Kit includes:
2x Bushes for the TOP Tripod mount. 
4x Bushes for the SIDE Tripod mount.
6 Bushes in total available in GOLD or BLACK Anodized finish. 
You are bidding on 1 SET (6 BUSHES) in Gold or Black Anodized finish.
** Please specify which color you need after purchase, or we will send a random color **

** Installation Tips **
Tripod Remove and Refit
  • Remove Shifter trim panel 
  • Remove all shifter boots and the 4 shifter holding bolts on top
  • Use a jack or hoist to get under the car safely 
  • Undo shifter bolt that connects to transmission and remove shifter completely from top
  • Undo side shifter tripod bolts
  • Undo top shifter tripod bolts
  • Installation is the reverse of the above
Removal of factory bushings
  • Secure tripod in bench vice - grip as close as you can to the bush you are working on
  • Side Bushes - Use a chisel or flat screw driver and tap around the outer part of the bush to remove it slowly
  • Alternate method - remove center bushing with screw driver and then use a hack saw to cut a slit into the bush to release the tension and then use the above method to remove
  • Alternate method - use a bench vice and two sockets to press the bushing out gently. The first socket should be the size of the bushing outer case and the second socket should be large enough that the first socket can fit into 
  • ** Caution ** with the socket method - you can easily break or damage your shifter tripod if you don't choose the sockets carefully. Don't force it if it's not working. 
  • The TOP bushings will be able to be removed with a screw driver / chisel and a hammer 
Installation of Racetune Solid Shifter Bushings
  • Install the TOP bushings first one at at time. Use a vice or a soft hammer to tap them in flush
  • Install the INNER side bushing first with a vice or hammer - use a rag or aluminium jaw proctors so you don't mark the bushings
  • Install the OUTER side bushing with a vice or hammer - use a rag or aluminium jaw proctors so you don't mark the bushings
  • Use a vice with jaw protectors or a rag to press both inner and outer bushes together so they are flush. 
  • Repeat for Left / Right as required. 
  • Assemble everything back again the reverse order and enjoy accurate and easier shifting!
*** Installation in Melbourne available for $125 ***


International postage and orders welcome $25 AUD FLAT RATE SHIPPING up to 500g total weight. 

Bulk orders and workshop pricing welcome for 5 or more quantity. 

Facebook: www.facebook.com/racetuneaus