suits TOYOTA RAV4 01/2010 to 2013 TARAGO 10/2009 to 08/2014 HIACE 09/2010 to 12/2012 COROLLA 10/2009 to 08/2012 Your original key must have a G stamped on the key blade (Not suitable for Keyless start models) New improved innovative aftermarket design is 200% stronger HARDENED PLASTIC CONSTRUCTION WITH METAL SLEEVE INSERT AND SCREW AT KEY BLADE ANCHOR POINT Complete key includes Remote, Uncut Key Blade, Transponder chip and New lithium battery is fitted Key will need to be cut and programmed by either a Locksmith or following instructions below *Key is aftermarket with no logo |
3 Easy steps to do it yourself
1- Program remote once received (Central locking will work now)
2- Take key to locksmith shop and get them to cut your key to code
3-Program transponder chip (this will now start car)
Remote Programming Procedure - Do it yourself
1. Open Driver side door
2. Insert the Original key in and out of ignition 2 times
3. Close and open driver door 2 times
4. Insert Original Key in and out of ignition once
5. Shut and open door twice
6. Close door
7. Insert key Turn ignition on (second click)
8. Turn ignition off and remove key
9. Door locks will cycle
10. Press lock and unlock together for 1 second then release both buttons and press lock for 3 seconds
(To delete remotes turn the key on and off 5 times in during step 7 then turn to OFF and remove the key from ignition. Door locks will cycle 5 times to confirm deletion)
Transponder chip programming do it yourself
1. Put Original master key in and out of ignition 5 times. Finish with key in ignition
2. Open and shut door 6 times
3. Remove original, insert new key
4. Leave for 60 seconds (or till Security light goes out on dashboard)
5. After 60seconds security light stops flashing then you can start car.