eBay

Super Fast Shipping !!!! ZKTECO Original

Features

Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
Easy-to-use and intuitive programming with ZKAccess Software
System management by browser from client PC’s. No need to install software on each client
Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Parameter

Number of Doors Controlled	1 Door	2 Door	4 Door
Number of Readers Supported	2	4	4
Types of Readers Supported	26-bit Wiegand, others upon request	26-bit Wiegand, others upon request	26-bit Wiegand, others upon request
Number of Inputs	2 (Exit Device and Door Status)	6 (2 Exit Device, 2 Door Status, 2 AUX)	12 (4 Exit Device, 4 Door Status, 4 AUX)
Number of Outputs	2 (1-From C Relay for Lock and 1-Form C Relay for Aux Output)	4 (2-From C Relay for Lock and 2-Form C Relay for Aux Output)	8 (4-Form C Relay for Lock and 4-Form C Relay for Aux Output)
Card Holders Capacity	30,000	30,000	30,000
Log Events Capacity	100,000	100,000	100,000
Weight	7.4lbs (3.35kg)	7.5lbs (3.4kg)	7.8lbs (3.55kg)
Communication	TCP/IP, RS-485 and WiFi optional	TCP/IP, RS-485 and WiFi optional	TCP/IP, RS-485 and WiFi optional
Enclosure	Powder Coated Aluminium	Powder Coated Aluminium	Powder Coated Aluminium
Mounting	Wall Mount	Wall Mount	Wall Mount
Recommended Power Supply	12V DC, 1.5A	12V DC, 1.5A	12V DC, 1.5A
Dimensions (Bundle Only)	15in.×3.15in.×11in.	15in.×3.15in.×11in.	15in.×3.15in.×11in.
	380mm(L) X 80mm(W) X 280mm(H)	380mm(L)×80mm(W)×280mm(H)	380mm(L)×80mm(W)×280mm(H)
Dimensions ( Board Only)	6.3in.×4.17in. (160mm×106mm)	6.3in.×4.17in. (160mm×106mm)	8.58in.×4.17in. (218mm×106mm)

KR600

The KR Series is the main accessories line of external wiegand readers for all our access control devices.

With an elegant and robust design, they are easy to connect and install, and offer the possibility to control one door from both sides. The LED lights indicate allowed or denied access. They have a proximity reading range of up to 10cm in the E series case and up to 5cm in the M series case. The fact that this series is waterproof, and the operating temperatures can range from -20º to +65º, it is the ideal solution for outdoor installation.Also they can be connected with our C3 controllers.

Function:

• Read range of up to 10cm for proximity card and 5cm for Mifare card

• External LED control

• External Buzzer Control

• Indoor/Outdoor operation

• Solid Epoxy potted

• Waterproof IP65

• Reverse Polarity Protection

Parameter

Read Range	KRxxx-E: Up to 10CM, KRxxx-M: Up to 5CM
Reading Time	≤300ms
Input Port	External LED Control , External Buzzer Control
Output Port	KRxxx-E: 26bit Wiegand (Default), KRxxx-M: 34bit Wiegand (Default)
Power/Current	DC 6-14V / Max.70mA
LED	Red and Green LEDs
Operating Temperature	-10°C to +65°C
Material	ABS+PC with texture
Operating Humidity	10% to 90% relative humidity non-condensing
Beeper	Yes
Index of Protection	• KR600-E/M: IP65 • KR601-E/M: IP65 • KR602-E/M: IP64

This access control uses zkaccess 3.5 software
kr600 readers are not mifare