Soft and Flexible Nozzle tip for Kobalt 80v, 40v, 24v Max and Dewalt 20v Max Leaf Blowers (BLOWER NOT INCLUDED) Improvements from previous model, now wider to fan out the airflow more and now made from TPU instead of PETG. Its highly flexible so it's much more durable and impact resistant than previous models made from PETG. Holds shape while using leaf blower. Less likely to scratch the paint on your car than hard nozzles if used to dry cars. Fits Kobalt Models #KHB 2580-06, KHB 6380-06, KHB 3040-06, KHB 5540-06, KHB4124B-03, and KHB4024A-03 and Dewalt models DCBL720B and DCBL720P1. Will fit DCBL772 as well if you remove the gray concentrator piece at the tip. Check your nozzle diameter at the exit, if it is 3.5 inches this should fit! Tight fit against the main tube, no need to tape or screw in place. The Nozzle is thin so that it will flex and fit over the tube easy. It's light weight as well so not to add any more weight to this already heavy blower. Pull back nozzle about 1.3-1.4 inches onto the tube and it wont come off and wont flutter. See last photo in listing. See it in action here: https://youtu.be/LkKF_3uOqnc (this is the older less wider model) Custom designed and 3D printed in southern California from TPU materials, so they wont deform under heat like PLA printed parts. ID at tube is 3.5 inches. ID at nozzle end on wide nozzle is 7.33 inch wide by 1.4 inches tall. Increases the flow path from 12 inches to 22 inches at 4 feet using the same speed and exit nozzle area. When installing, it's important to push the nozzle about an inch onto the main tube to minimize the chance of it blowing off. We can 3D print other custom components at a low cost. Message for details and a free quote. Leaf blower not included, only the nozzle which is shown in the picture.

Check out our Wall Mounts as well for the KHB 6380-06 or KHB 2580-06 blower as well.