Flynn Front Tron Set
This listing is for:
1) Two pieces of replica shaped EL Tape for the front of a Sam Flynn Costume - a Left and a Right
2) A single 1cm x 15cm EL Tape for the glowing mid line
3) A Powerful 8 x AA battery EL Driver - capable of powering a further 250squ cm of EL Tape or up to 10 metres of EL Wire (it will power the "Tron Back Set" plus a further 2cm X 25cm of EL Tape)
4) A 3-way splitter,
5) 75cm of hook & loop tape - with sticky hoop and sew-able loop to make it easy to attach the set to a costume and have it removable
The set is available in Light Blue (Tron Blue)Dimensions of the products:
If you are making a costume, it is a good idea to plan it out properly.
For this set, the driver/inverter is very powerful and comes with a separate power pack
So here are the dimensions of all the parts plus lengths of wire between them.
Feel free to message me if you have any questions
THE POWER PACK
Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.2cm x 1.9cm
it has a 65cm thin power wire coming out of it that leads to the...
DRIVER
The driver is 6cm x 4cm x 4cm
It has the controls on it - Off, Flashing or On
It has a 55cm wire coming out of it that leads to the...
SPLITTER
The Splitter is 40cm long in total,
it is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to...
Left and Right Flynn Replica EL Tapes
The EL Tape is 30 cm from top to tail with the stick and hoop that comes in near the shoulder adding another 8cm
The tape is just 350 microns thick - that is 1/3rd of a millimetre!
Sticky back hook & loop tape is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky
You must sew the other part of the hook & loop tape onto the costume making it very convenient to attach and remove
Of course, you don't need to use the hook & loop tape and fix it any way you choose
The third channel of the splitter leads to:
The Mid-Line
Sam Flynn has a small line of light that runs down the middle of his chest. This is lit by the 1cm x 15cm EL Tape provided. This tape can be easily cut to shape if you prefer it smaller
SPLITTERS
You can 'daisy chain' the splitters so adding more will allow you to add several more pieces of EL Tape to the set
Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions
The whole kit is ready to use - just plug and play!
OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our ebay store
- - - - - - - - - - - -
This EL Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver
by using splitters you can also connect different strands to the same driver
VISIT OUR SHOP TO SEE OUR RANGE OF INVERTER/DRIVERS, SPLITTERS AND OTHER EL WIRE
