(2) Delphi* DP200-210* style Diesel Injection Pump Drive Seals 7174-856-R

Please send us your pump number before buying, as all newer pumps vary a lot.

This is an example of complete pump Model Number: 8923A111T

(there are 1000's of different numbers)

Replaces Part Number 7174-856* there are usually two, so they are sold as a pair.

When replacing your old seals here is some tips.

  • Remember the installed direction. Sometimes they are both lip in, sometimes they are not,
  • Some will have a clip between the 2 seals,
  • Drive shafts have a couple edges that are sharp and make it hard to get the seals in without cutting them, in the field we use the corner of a plastic bag to cover just the sharp edges just enough to get the seals past.
  • WARNING, many pumps that take these seals may have special timing procedures. If you get the timing off you will be in big trouble. Call with questions.

*Name and Numbers are used for reference purposes only.



 Please send us your complete pump model number if you are not sure if this kit is right for your application.

8007367440

dieselitems

M – F     7:30 - 4:30 CT

"Jason will be your pump man if you let him"

From a Customer who Found Us on Ebay: "Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY". Thank You so much Ken - AZ

I rebuild and set these pumps for a living, and have been doing so for 30 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use these seal will run about $795.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing.

Here are some of things that can effect the price:
  • Pump is locked up and/or the main drive shaft is broke.
  • Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor.
  • Cam ring/rollers in the pump is worn, requires inspection during tear down.
  • Pump has excessive rust and corrosion.
  • Housing is damage or unusable.

Here is how it works:
  • Contact me with your pumps Models numbers.
  • I will try to give you a closer estimate based on the problems you describe.
  • Pump must not have been taken apart.
  • Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel.
  • You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment)
  • We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days).
  • If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you.

Why would you want to do this?
  • Pump will be cleaned, inspected, rebuilt, tested and will look and run great.
  • All fully rebuilt units are invoiced and include a 6 months warranty.
  • We will provide tips for reinstalling as well as some of the parts you may need to do so.
  • We have access to parts, specifications and test equipment to make sure your pump is right.

Remember the call is free, the service is great and my knowledge base covers over 26 years. Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks.

 

Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection  pump is assuming their own risk.

* Name and Numbers are used for reference purposes only And items are not the products of these manufacturers.