Quartz Infra Red Wall Mounted Heater 2 Heat Settings 600W/1200W

Choice of operating as 600 watt (1 bar)or 1200W (2 bar) selected by operating pull switch. The pull cord also switches the heater off.

Mechanical flag indication of how many bars selected.

This heater must be mounted on wall. The bracket is adjustable for direction. The heater must be mounted a minimum of 1.8 metres from the floor, 400mm from the ceiling and 200mm from objects either side.

If fitted in a bathroom the heater must be at least 600mm from the edge of bath, shower or top of handbasin. All electrical equipment located in a bathroom must be protected by a 30mA RCD or RCBO device for safety.

Designed for fixed installation, so does not come fitted with a plug. For intermittent use in domestic locations only. Not suitable for continual use in commercial locations.

600mm long pull cord. 1.3m long cable.

Dimensions: 540mm wide x 130mm high x 135mm deep (fully tilted).Suitable for indoor use only. IP24.

Approved to BS EN60335-2. CE approved.

VAT INVOICE ON REQUEST