Offered here is a particularly desirable original vintage Omega wristwatch case, reference 2735-2 SC, dating to approximately the mid-1950s and made for one of Omega's elegant manual-wind center-seconds watches powered by the celebrated Omega caliber 420.
This is not a generic replacement case. The interior is fully factory marked and clearly identifies the case as an authentic Omega component. For anyone restoring an incomplete caliber 420 Omega, especially a watch missing its original gold-capped case, finding the correct period case in usable condition can be considerably more difficult than sourcing an ordinary movement or dial.
The case has the warm rose-gold appearance associated with Omega's gold-capped production of this period, paired with a stainless-steel inner and rear construction. This two-metal architecture was an important part of Omega's mid-century catalog, offering the visual richness of precious metal on the visible exterior while preserving the strength and corrosion resistance of stainless steel beneath.
The inside of the case is clearly stamped:
ACIER STAYBRITE
OMEGA WATCH CO
FAB. SUISSE
SWISS MADE
2735-2 SC
along with the Omega factory trademark.
These markings are especially important because they identify the case directly rather than relying on visual attribution alone.
“Acier Staybrite” refers to the stainless-steel construction used for the underlying case structure. Staybrite was a well-known corrosion-resistant steel used by quality Swiss watch manufacturers during this period.
The 2735 is the Omega case reference.
The -2 identifies this as the second case execution or production variation within the reference.
The SC suffix is derived from the French “seconde centrale”, meaning center seconds. This distinguishes the case specification from configurations designed around a subsidiary seconds display.
The surviving factory stamps remain clearly readable and are one of the strongest features of the case.
Reference 2735 belongs to Omega's elegant mid-1950s generation of manually wound gentleman's watches.
Period Omega reference information associates the 2735 family with approximately 1954 through the later 1950s, generally using Omega's caliber 420, a compact 17-jewel manual-wind movement with central sweep seconds.
The caliber 420 was introduced during the early 1950s and represented the type of refined, thin manual-wind movement Omega used in higher-quality dress watches of this era.
Complete watches using this reference are typically encountered with restrained 1950s dial designs, applied hour markers, elegant Dauphine-style hands, and traditional leather straps.
The overall design is exactly what collectors associate with Omega's postwar golden age: relatively compact dimensions, sharply formed lugs, thin bezels, and careful Swiss case construction.
Omega offered the 2735 family in more than one case-metal configuration.
The gold-capped version was cataloged separately from ordinary stainless-steel examples and combined a substantial gold outer layer with a stainless-steel supporting case structure.
This is different from inexpensive modern electroplating.
Traditional gold-capped watch cases use a comparatively substantial mechanically applied layer of gold over the base metal, producing a much more durable exterior and a richer appearance than very thin flash plating.
Omega used gold-capped construction extensively during the 1950s and 1960s on some of its most attractive dress watches and Seamasters.
The warm reddish tone visible on this example is particularly attractive and reads much more like vintage rose or red gold than modern bright yellow plating.
The exposed stainless-steel interior creates a classic two-tone construction, exactly the sort of detail vintage Omega restorers look for when attempting to return a movement to a period-correct case.
Photographed measurements show approximately:
Case diameter: 33.87 mm
Lug-to-lug: 41.09 mm
The original specification for this family is approximately 34 to 35 mm depending on the measuring method, placing this example directly within expected dimensions.
The reference is also associated with an approximately 18 mm lug width, making it compatible with a wide range of correct vintage-style leather straps once assembled.
These dimensions are classic for a mid-1950s gentleman's Omega and provide a refined but still substantial wrist presence.
The case has beautifully sculpted, elongated lugs with pronounced angular transitions.
Unlike later mass-produced rounded cases, these early Omega cases rely heavily on their lug geometry for visual character. The lugs taper toward their ends and display polished gold-colored outer surfaces, creating a much more elegant silhouette once fitted with a dial and movement.
The case profile remains thin and refined, appropriate for the manually wound caliber 420 movement for which it was designed.
The crystal remains installed as photographed.
The interior steel surface displays the attractive engine-turned or overlapping circular finishing commonly found inside better-quality Swiss cases of the period. This finishing is largely hidden once the movement is installed but reflects the attention given even to non-visible components.
Correct reference-number matching is increasingly important in vintage Omega collecting.
A collector restoring a ref. 2735 does not simply need a case of approximately the right diameter. The movement seat, stem position, dial clearance, crystal dimensions, case-back geometry, lug proportions, and movement retention all have to correspond correctly.
That makes an original factory-marked 2735-2 SC case considerably more useful than an unsigned or merely similar period case.
This is particularly relevant to caliber 420 projects because movements survive more frequently than complete, correctly matched gold-capped cases.
The exact reference stamped inside this example removes much of the guesswork for a serious restorer.
Original vintage Omega cases with clearly identifiable factory reference numbers have developed a collector market of their own, particularly when they correspond to desirable 1950s references.
A directly comparable Omega 2735-2 SC empty case, also described as a rose-gold and stainless-steel case for caliber 420, sold on eBay for approximately $470.
That is an unusually useful comparison because it is not merely another vintage Omega watch. It is essentially the same reference and the same type of component being sold separately.
Complete reference 2735 watches can command substantially more depending on dial originality, movement condition, case condition, and overall configuration. Complete examples using caliber 420 have been marketed in the high hundreds and well into four figures.
For that reason, a correct loose case like this has real utility for a collector who already owns the movement, dial, or incomplete watch.
It is not simply decorative scrap or an unidentified vintage watch case. It is a specific, factory-numbered restoration component from one of the most collectible periods in Omega's history.
The case is offered exactly as photographed.
There are surface scratches, small marks, rubbing, and normal evidence of age and previous use consistent with a vintage case approximately seventy years old.
The gold-colored exterior remains visually attractive and retains a strong warm rose-gold appearance.
The lugs remain well defined and the case retains good overall shape.
The stainless interior shows scratches and watchmaker handling marks from previous opening and assembly.
The original factory markings remain clearly visible and readable.
The crystal is present.
No movement, dial, hands, crown, strap, or bracelet are included unless specifically visible in the photographs.
This listing is for the case assembly shown in the photographs only.
Please study all photographs carefully because they form an important part of the description and show the exact condition, measurements, markings, and components included.
A particularly appealing original Omega component from the height of the company's 1950s production.
The combination of the 2735-2 SC reference, factory Omega markings, Staybrite steel construction, rose-gold-capped exterior, caliber 420 compatibility, and elegant approximately 34 mm proportions makes this much more interesting than an unidentified loose vintage case.
For the owner of an incomplete reference 2735 or a suitable Omega caliber 420 restoration project, this may be exactly the difficult component needed to bring a period watch back together correctly.
Original factory cases become progressively harder to source as watches are broken for parts, melted, damaged, or permanently separated from their original movements. A clearly marked surviving example with the correct mid-century Omega architecture therefore has genuine restoration and collector value.
A scarce and highly usable original Omega case from one of the company's finest vintage periods.