MITUTOYO
543-585
ID-B105
ABS COOLANT PROOF
DIGIMATIC INDICATOR

New, supplied from Japan in Mitutoyo packaging.

BACK PLUNGER, DIGITISED
A back plunger indicator reads with the spindle
at right angles to the dial, so the display
faces the operator while the probe works into a
bore, a slot or a recess the operator cannot see
into.

That geometry is why back plunger dial gauges
are everywhere in machine shops. This one
replaces the mechanism with a direct reading
digital scale.

The spindle travel is read directly rather than
through a gear train, which is how 5 mm of
stroke is held to 0.003 mm over the full range.
A geared dial indicator loses accuracy to
backlash at exactly that point.

ABS - ABSOLUTE SCALE
The origin you set is held as the measuring
datum after the power is switched off.

Switch the indicator back on and it is already
zeroed where you left it. There is no re-
zeroing, and no over-speed error: the scale is
absolute, so moving the spindle while the power
is off does not lose the reading.

On an incremental indicator, both of those are
daily annoyances and occasional scrap parts.

IP66 - COOLANT PROOF
Protected against dust and against jets of water
from any direction.

This is what lets the indicator stay in the
fixture inside a machining centre while flood
coolant is running, instead of being fitted for
measurement and removed for cutting.

35 MM WIDE
Narrow enough to mount several side by side on
one fixture for multi point measurement.

The display can be rotated 180 degrees, so the
reading faces the right way whichever way the
indicator has to be clamped.

TOLERANCE JUDGEMENT
Upper and lower limits can be set, and the
indicator shows a pass or fail result. The
judgement alone can be shown enlarged, so an
operator reads a verdict at a glance rather than
a number.

DATA OUTPUT
An output connector is fitted for connection to
statistical process control and measurement
systems.

SPECIFICATIONS
Manufacturer     : Mitutoyo
Order number     : 543-585
Model            : ID-B105
Range            : 5.0 mm
Resolution       : 0.001 / 0.01 mm,
                   switchable
Accuracy         : 0.003 mm over range
Measuring force  : 2.0 N or less
Response speed   : Unlimited
                   (not for scanning)
Protection       : IP66
Scale type       : ABS absolute
Body width       : 35 mm
Power            : SR44 silver oxide
                   button cell
                   (monitor cell
                   supplied)
Battery life     : approx 7,000 hours,
                   about 1 year in
                   normal use
Output           : Digimatic data
                   connector
JAN              : 4946368554242
Condition        : NEW
Made in          : Japan

NOTES
Metric only. This indicator does not switch to
inch.

Connecting cable, stand and clamp are not
included.

The manual supplied is in Japanese.

Shipped from Japan with tracking.