Vintage Roamer watch with MST 264 movement, for spares or repair. Working, but with issues.


The watch has been stripped, ultrasonically cleaned and lubricated. I don’t have a timegrapher so I don’t know what the rate is but it seems to be pretty good. After disassembly I checked to see where the balance impulse jewel sat between the gap (there are no pins) and it seemed to be fairly central. An overnight test suggests it keeps good time


Observations: In the past somebody has installed a new mainspring, replaced the crystal and the winding crown. Perhaps that same person stripped the thread on the balance cock and plate. Fortunately the two location pins hold it secure. Continuing on the downside; the keyless works are in poor shape with lots of wear. In hand setting mode things are rough. In winding mode there is a lot play making it difficult to wind.


Though the case looks tidy (see photos), the case back plating is worn. The hour and minute and seconds hands are tidy.


See photos for overall condition.