|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Choose Your Variation
| Variation | Thickness | Surface | Gloves | Best For |
|---|---|---|---|---|
| 6 mm Foil-Faced (with gloves) | 6 mm / 0.24 in | Aluminum foil single-sided facing | 1 pair heat-resistant gloves included | Radiant heat: turbo, downpipe, firewall, hood liner |
| 10 mm Plain White (no foil) | 10 mm / 0.39 in | White ceramic fiber, no facing | Gloves not included | Soak-through heat: exhaust wrap, muffler, transmission tunnel, shop use |
Specs (Both Variations)
- Sheet size: cut-to-size with scissors or a sharp knife
- Continuous service temperature: about 2100°F (1150°C), melt point above 2300°F (1260°C)
- Core: white aluminosilicate ceramic fiber, low thermal conductivity
- 6 mm variation adds a single-sided aluminum foil facing that reflects radiant heat instead of just absorbing it
- Flexible and compressible: wraps pipes, lays flat under hood liners, or stuffs into cavities
Fits / Great For
- Engine bay: firewall insulation, hood liner, turbo and downpipe heat shield, intake air charge cooling
- Exhaust: muffler and catalytic converter wrap zones, transmission tunnel protection, floor pan heat
- Truck, Jeep, off-road, RV, marine: generator bays, battery boxes, cab insulation layers
- Workshop: kiln and forge ambient insulation, soldering and welding mats, grill and smoker insulation
10 mm or 6 mm Foil — How to Choose
The 10 mm plain blanket is the pure insulator: thickest mass for soaking up conducted heat, best where you can wrap or stuff it — exhaust pipes, tunnels, shop equipment. The 6 mm foil-faced sheet is thinner and rigid-friendly: the foil reflects radiant heat away from paint, wiring, hood liners and plastics, which makes it the pick for firewalls, turbo shields and hood insulation where appearance and radiant blocking matter. Many customers run both — foil where it faces the cabin, plain where it wraps the pipe.
Installation Notes
- 1. Measure and cut with scissors; cut outdoors or over a drop cloth — first cut releases fibers.
- 2. Attach with stainless wire, mechanical fasteners or high-temp adhesive; never rely on tape alone near exhaust.
- 3. Keep the foil side facing the heat source for radiant control; leave a small air gap for best results.
GENERAL CHARACTERISTICS:
High temperature stability (up to 2300°F)
Resistance to thermal shock
Good handling strength
Excellent flexibility
Good sound absorption
Feature:
Seismic heat resistance.
Good elasticity of fiber, high temperature shrinkage.
Waterproof, moisture-proof, corrosion-resistant, resistant to differentiation.
Note:
1.As the product size is manually measured, please allow an error of 1-2cm.
2.If you need a different thickness or size or quantity, please feel free to contact us.
1. It will be much appreciated that you finish your payment asap or it will make UPI(unpaid item case) on your account leading to be suspended or restricted by eBay when those UPI cases carry over to certain amount.
2. Any problems please contact us for more details.
We do appreciate your purchase here. If you are astisfied with the item as well as our service, please kindly leave us a Positive Feedback to help develop our business. Thank you in advance.
1. All items will be shipped to buyer's ebay address.
2. All items will be shipped within 24 working hours upon receipt of payment, and multiple items will be combined shipping.
3. In most cases, delivery takes around 3-5 business days, it's highly depended on the efficiency of the shpping carrier. If your item doesn't arrive on time, please contact us immediately for further assistance. Please note there is no local pickup service available.
1. We care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. We try our best to reply your Ebay message as soon as possible, please kindly allow 24 hours for us to response.
2. Our goal is to make sure you are a happy buyer and pleasant shopping with us. Please contact us before leaving any 1 or 2 star ratings, negative feedback or open any dispute. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.
. ]
6mm Ceramic Fiber Foil Heat Shield 24x55in For Car SUV Truck Firewall Turbo New
Choose Your Variation
Specs (Both Variations) - Sheet size: cut-to-size with scissors or a sharp knife - Continuous service temperature: about 2100°F (1150°C), melt point above 2300°F (1260°C) - Core: white aluminosilicate ceramic fiber, low thermal conductivity - 6 mm variation adds a single-sided aluminum foil facing that reflects radiant heat instead of just absorbing it - Flexible and compressible: wraps pipes, lays flat under hood liners, or stuffs into cavities
Fits / Great For - Engine bay: firewall insulation, hood liner, turbo and downpipe heat shield, intake air charge cooling - Exhaust: muffler and catalytic converter wrap zones, transmission tunnel protection, floor pan heat - Truck, Jeep, off-road, RV, marine: generator bays, battery boxes, cab insulation layers - Workshop: kiln and forge ambient insulation, soldering and welding mats, grill and smoker insulation 10 mm or 6 mm Foil — How to Choose The 10 mm plain blanket is the pure insulator: thickest mass for soaking up conducted heat, best where you can wrap or stuff it — exhaust pipes, tunnels, shop equipment. The 6 mm foil-faced sheet is thinner and rigid-friendly: the foil reflects radiant heat away from paint, wiring, hood liners and plastics, which makes it the pick for firewalls, turbo shields and hood insulation where appearance and radiant blocking matter. Many customers run both — foil where it faces the cabin, plain where it wraps the pipe. Installation Notes - 1. Measure and cut with scissors; cut outdoors or over a drop cloth — first cut releases fibers. - 2. Attach with stainless wire, mechanical fasteners or high-temp adhesive; never rely on tape alone near exhaust. - 3. Keep the foil side facing the heat source for radiant control; leave a small air gap for best results.
All right reserved. |