Spring Tool Balancer HW-9.0
Designed to help improve work efficiency, this spring tool balancer supports smoother tool handling in assembly and material handling tasks. It offers adjustable load balance, a self-locking control design, and a practical structure for everyday use in work environments. ⚙️
Key Features
- Built for Regular Use: Made of aluminum alloy, stainless steel, alloy, and rubber with a baking paint process.
- Spring-Powered Design: Uses spring energy instead of pneumatic or electrical balancing energy.
- Adjustable Performance: Load bearing range is 5-9kg / 11.02-19.84lbs for different tool needs.
- Flexible Operation: The hook can rotate 360°, and the self-locking control device helps stop at any position.
- Practical Safety Design: Includes a safety lock shackle, rubber anti-collision pad, safety hole, and steel wire rope.
- Easy to Clean: Smooth surface and simple structure make wipe-down cleaning easy with a soft cloth.
Description
This spring tool balancer is designed to support tools during work and help reduce repeated lifting strain. It can hold tools within a work stroke of 1.9m / 6.23ft, allowing movement up and down at different positions during operation. The intuitive numerical gauge makes adjustment more precise for different working needs. 🛠️
The product uses a self-locking control device inside to help stop at any position and prevent the steel wire cable from rebounding. The hook rotates 360°, which supports flexible handling, while the rubber anti-collision pad above the shackle helps buffer impact caused by cable retraction. It is suitable for assembly line work and other tasks that involve hanging tools or moving objects.
The surface is smooth, the structure is simple, and the product is designed for easy daily maintenance. Please read the operating manual completely before use and follow the safety instructions carefully.
Specifications
| Model | HW-9.0 |
| Material | Aluminum Alloy, Stainless Steel, Alloy, Rubber |
| Process | Baking Paint |
| Color | Yellow |
| Shape | Round |
| Assembly Required | No |
| Wire Rope Length | 1.5m / 4.92ft |
| Work Stroke | 1.9m / 6.23ft |
| Wire Rope Diameter | 4mm / 0.16in |
| Load Bearing Range | 5-9kg / 11.02-19.84lbs |
| Product Size | 19.05 × 13.97 × 34.29cm / 7.5 × 5.5 × 13.5in |
| Package Size | 36 × 23 × 22cm / 14.17 × 9.06 × 8.66in |
| Gross Weight | 5.5kg / 12.23lbs |
| Net Weight | 5kg / 11.02lbs |
Package Included
- 1 × Spring Tool Balancer
- 1 × Wire
- 1 × Wrench
- 1 × English Manual
Important Notes
- Please read the operating manual completely before use and pay close attention to the safety instructions.
- When the product is not loaded, please do not pull it to avoid sudden steel wire rope retraction and possible injury.
- When disassembling the product, fully relax the spring by rotating the adjustment shaft counterclockwise before doing other work.
- A monthly safety inspection should be conducted to identify potential safety risks.
- If the product will not be used for a long time, unload and store it, and take moisture-proof measures to help prevent the spring from rusting.
- Please allow slight color difference due to shooting light and 1-3cm manual measurement error before ordering.
Please check the listed specifications carefully before purchase to make sure the product meets your needs. 👍
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
On Nov 4, 2026 at 23:02:23 PST, seller added the following information: