Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
-
Contact us: Ask us for double check.
Fitment:
For Toyota Mirai 2016-2019
For Toyota Prius V 2012-2018
Placement on Vehicle:
Rear Left+Right
Package Included:
2pcs of Wheel Hub Bearings
Removal
- Remove the bolt securing the front wheel speed sensor, then separate the sensor from the steering knuckle.
- Remove the brake caliper torque member bolts, keeping the brake hose connected. Use a piece of wire to hang the caliper in a safe position to avoid damage or hose tension.
- Mark alignment indicators on both the disc brake rotor and the wheel hub and bearing for reinstallation reference, then remove the disc brake rotor.
- Remove the cotter pin and the nut retainer from the wheel hub lock nut. Use a power tool to loosen the wheel hub lock nut on the drive shaft.
- Place a piece of wood against the lock nut and tap it gently with a suitable tool to help disengage the drive shaft from the wheel hub and bearing.
- Remove the engine side cover to access related components.
- Remove the lower nut and bolt from the steering knuckle, then separate the transverse link from the knuckle.
- Fully separate the drive shaft from the wheel hub and bearing assembly, then secure the drive shaft aside with wire to prevent damage.
- Use a power tool to remove the bolts that secure the wheel hub and bearing to the steering knuckle.
- Remove the splash guard, then pull the wheel hub and bearing assembly off the steering knuckle.
Installation
- Clean the mating surfaces of the steering knuckle and the new wheel hub and bearing. Apply lubricant to the specified surface of the joint sub-assembly.
- Install the splash guard and the new wheel hub and bearing assembly onto the steering knuckle.
- Install and hand-tighten the wheel hub and bearing bolts, then torque them to the manufacturer’s specification.
- Reposition the drive shaft into the wheel hub and bearing. Use a piece of wood and a suitable tool to tap the lock nut area to seat the drive shaft properly. Secure the drive shaft in place.
- Install the transverse link to the steering knuckle, then reinstall and torque the lower nut and bolt to specification.
- Reinstall the engine side cover.
- Install the wheel hub lock nut onto the drive shaft. Hold the wheel hub and bearing with a suitable tool, then use a torque wrench to tighten the lock nut to the specified torque. Do not use power tools for final tightening.
- Install a new nut retainer and a new cotter pin. Securely bend the cotter pin to prevent rattling.
- Align the matching marks on the disc brake rotor with those on the wheel hub and bearing, then install the disc brake rotor.
- Reposition the brake caliper, then install and torque the brake caliper torque member bolts to specification.
- Reconnect the front wheel speed sensor to the steering knuckle and secure it with the bolt.
- Reinstall the wheel assembly, then torque the lug nuts in a star pattern to specification.
- Lower the vehicle to the ground, then perform a road test to check for noise, vibration, and proper brake/ABS function.
Notice:
Please check the model and important parameters before purchase to avoid unnecessary after-sales problems, if you are not clear, please feel free to contact us, thank you for your cooperation!
| Item Specifics |
|---|
| UPC | Does not apply |
| Brand | VaultPro |
| Manufacturer Part Number | 13829633 |
| Manufacturer Warranty | 1 Year |
| Placement on Vehicle | Rear Left Right |
| Type | Wheel Hub & Bearing Assembly |
| Material | Steel |
| OE/OEM Part Number | HA590464, 512509 |
| Performance Part | Yes |
| Universal Fitment | No |
| Vintage Car Part | No |
| Bolt Pattern | 5 x 4.5 in (5 x 114.3 mm) |
| Brake Pilot Diameter | 2.44 in. or 62 mm |
| Flange Diameter | 5.98 in. or 151.9 mm |
| Flange Offset | 2.52 in. or 64 mm |
| Flange Shape | Square/Modified |
| Hub Pilot Diameter | 2.91 in. or 73.8 mm |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12x1.5 |
| Anti-lock Braking System | Yes |
| Finish | Polished, Rust Protected |
| Bolt Circle Diameter | 4.5 in. or 114.3 mm |
| Spline Quantity | N/A |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Size | N/A |
| Items Included | 2pcs of Wheel Hub Bearings |
| Item Weight | 14.51 LB |
| Fitment type | Direct Replacement |
| Quantity | 2 |
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Any payment can be accepted by ebay.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.