eBay

Welcome to our store!

To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.

Choose a vehicle from the "My Garage" list. Or
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
Contact us: Ask us for double check.

Fitment:
Mazda CX-9 Grand Touring 2016-2021 L4 2.5L Front Side AWD
Mazda CX-9 Sport Model 2016-2021 L4 2.5L Front Side AWD
Mazda CX-9 GS-L Model 2016-2021 L4 2.5L Front Side
Mazda CX-9 Signature 2016-2021 L4 2.5L Front Side
Mazda CX-9 GT 2016-2021 L4 2.5L Front Side
Mazda CX-9 GS Model 2016-2019 L4 2.5L Front Side AWD
Mazda CX-9 GS Model 2020-2021 L4 2.5L Front Side
Mazda CX-9 i Grand Touring 2016-2020 L4 2.5L Front Side
Mazda CX-9 100th Anniversary Edition 2021 L4 2.5L Front Side
Mazda CX-9 Carbon Edition 2021 L4 2.5L Front Side AWD
Mazda CX-9 Kuro Edition 2021 L4 2.5L Front Side
Mazda CX-9 All Submodel 2022 L4 2.5L Front Side AWD

Note: It fits with AWD(All Wheel Drive), not fit FWD(Front Wheel Drive)

CV Axle Installation Instructions：

Pre-Installation Preparation

Tool Compatibility: Prepare a torque wrench (recommended range: 50-200N·m), ball joint separator, circlip pliers, socket set, and rubber mallet. Ensure the tool specifications match the vehicle's bolts.
Part Inspection: Verify that the CV axle model matches the vehicle's VIN code. Check for no shaft bending, intact and leak-free boot, undamaged constant velocity joint raceways, and normal circlip elasticity.
Vehicle Preparation: Park the vehicle on a level surface, engage the parking brake and secure the wheels, lift the vehicle to a safe height (recommended: over 30cm above the ground), and remove the wheel on the side to be replaced.

Installation Steps

Remove the old axle: Disconnect the fixing bolts between the half-shaft and the transmission, separate the steering knuckle from the lower control arm ball joint using a ball joint separator, and gently tap the flange end of the half-shaft to remove the old axle (avoid impacting the transmission output shaft).
Cleaning and Pre-treatment: Clean the splines of the transmission output shaft and the contact surface of the steering knuckle bearing housing to remove oil, grease, and rust. Apply a small amount of lithium-based grease (follow the manufacturer's instructions for whether to apply it to the transmission end).
Install the new axle: Align the splined end of the new CV axle with the transmission output shaft, push it steadily until the circlip fully locks into place (a clear "click" sound is heard). Ensure the flange surface fits closely with the steering knuckle, and tighten the fixing bolts to the specified torque (reference value: 80-120N·m; refer to the vehicle's service manual for exact specifications).
Reassembly and Inspection: Reconnect the lower control arm ball joint and tighten the lock nut. Install the wheel (tighten the wheel bolts evenly in a diagonal pattern, torque reference: 90-110N·m) and lower the vehicle.

Usage Precautions

First startup after installation: Idle the engine for 30 seconds, check for transmission leaks, and turn the steering wheel to test for smooth operation without jamming or abnormal noise.
Driving Restrictions: Avoid sudden acceleration, hard braking, and high-speed cornering within the initial 500km. Resume normal driving after the components are fully broken-in.
Abnormal Condition Handling: If vibration, abnormal noise (especially during cornering), or oil leakage occurs while driving, stop the vehicle immediately for inspection to prevent damage to the transmission or suspension system.

Notice:
Please check the model and important parameters before purchase to avoid unnecessary after-sales problems, if you are not clear, please feel free to contact us, thank you for your cooperation!

Item Specifics
UPC	Does not apply
Brand	VaultPro
Manufacturer Part Number	13520101
Manufacturer Warranty	1 Year
Quantity	2
Fitment Type	Direct Replacement
Type	CV Axle
Placement on Vehicle	Front Left Right
Interchange Part Number	NCV47084, NCV47075
OE/OEM Part Number	FTF12560X,FTF22550X
Superseded Part Number	MZ8234, MZ8228
Manufacturer Warranty	1 Year
Fitment type	Direct Replacement
Package Quantity	2
Part Type	CV Axle Assembly
Vintage Part	No
Universal Fitment	No
Performance Part	No

About Us:

We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.

Payment:

Any payment can be accepted by ebay.

Shipping:

2-8 working days in transit.

Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.

Returns:

30-day free return provided.

Contact Us:

Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.