Description:
Control the speed of compatible DC motors with this PWM DC Motor Speed Controller. Designed for low-voltage DC applications, it features a rotary potentiometer for smooth, adjustable speed control. It can also be used for compatible LED dimming applications when the electrical requirements are suitable.
Key Features:
Adjustable Speed Control: Rotary potentiometer provides stepless PWM speed adjustment.
Wide Voltage Range: Designed for DC supplies between 5V and 16V.
10A Continuous Current: Supports continuous current up to 10A under suitable operating conditions.
Short-Duration Peak Current: Supports up to 20A for less than 10 seconds, as specified.
Rotary On/Off Control: Turn the knob to switch on and adjust the output; the far-left position switches the controller off.
Compact Design: Small circuit board for suitable installations.
Potential LED Dimming Use: Can control compatible LEDs when correctly matched to the supply and load.
Product Specifications:
Product Type: DC PWM Motor Speed Controller
Operating Voltage: 5V–16V DC
Continuous Current: Up to 10A
Peak Current: Up to 20A for less than 10 seconds
Control Method: PWM (Pulse Width Modulation)
Adjustment Range: 0%–99% duty cycle
Control Interface: Rotary potentiometer
Maximum Stated Efficiency: Up to 98%
Approximate Board Dimensions: 30 × 20 × 14mm, excluding potentiometer
Applications: Compatible DC motor speed control and suitable LED dimming
Package Includes:
1 × DC PWM Motor Speed Controller Module
Important Safety Notes:
Check the motor, power supply and wiring specifications before use. Do not exceed the rated voltage or current.
The 20A peak rating is for short-duration use only, not continuous operation.
LED dimming compatibility depends on the LED type and circuit. Some LEDs require a suitable current-limiting resistor or compatible driver.
Incorrect wiring or an incompatible load may damage the controller or connected equipment.
This is an electronic control module; a power supply, motor, enclosure and connecting wires are not included unless stated.