Fluke 435 Power Quality Analyzer meter helps you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a “must have” for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.

 

• Troubleshoot real-time: Analyze the trends using the cursors and zoom tools-even while background recording continues
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
• Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
• Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
• Measure all three phases and neutral: With included four current probes
• AutoTrend: Every measurement you see is always automatically recorded, without any setup
• System-Monitor: Up to ten power quality parameters on one screen according to EN50160 power quality standard
• Inrush mode: For troubleshooting nuisance circuit breaker tripping
• View graphs and generate reports: With included analysis software
• Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals
• Mains signaling: Measure interference from ripple control signals at specific frequencies
• Battery Life: Seven hours operating time per charge on NiMH battery pack

 

Applications

• Frontline troubleshooting – quickly diagnose problems on-screen to get your operation back online
• Predictive maintenance – detect and prevent power quality issues before they cause downtime
• Quality of service compliance – validate incoming power quality at the service entrance
• Long-term analysis – uncover hard-to-find or intermittent issues
• Load studies – verify electrical system capacity before adding loads
• Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices

 

Features:

• Complete three-phase troubleshooting tool: measures virtually every power system parameter: voltage, current, frequency, power, power consumption (energy), unbalance and flicker, harmonics and inter-harmonics. Captures events like dips and swells, transients, interruptions and rapid voltage changes.
• The Fluke 435 features 0.1 percent voltage accuracy making it fully compliant with the IEC 61000-4-30 Class A standard
• Logger function: record the detail you need. Detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month.
• Four channels: simultaneously measures voltage and current on all three phases and neutral.
• Auto Scaling: easier trend analysis with automatic scaling of the vertical axis you will always use the full display to view the waveforms.
• Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically.
• Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
• Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack. Menu-driven interface simplifies operation.
• Extensive data analysis possibilities. Cursors and zoom can be used ‘live’ while taking the measurements, or ‘offline’ on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView software.
• The Fluke 435 comes with Power log software to analyze recorded data and to create reports.
• Complies with IEC 61000-4-30 measurement standards