MITSUBISHI OUTLANDER MK3 UNDERTRAY / SPLASH GUARD
Used black plastic engine undertray / lower engine splash shield, manufacturer part number 5370B626.
The supplied part is identified in the source listing as fitting the Mitsubishi Outlander MK3, 2013–2021. It is designed for installation on the underside / lower engine bay and incorporates moulded mounting points and clips together with ventilation/opening sections.
CONDITION & PART IDENTIFICATION
This is a used Mitsubishi undertray / splash shield. Please inspect every photograph carefully for the exact condition, mounting points, openings, shape and visible markings before purchasing.
Part number confirmation is strongly recommended: verify the stamped/labelled part number against your existing component wherever accessible. Automated eBay item-specific vehicle dropdowns should not be treated as a substitute for physical part-number and VIN verification.
ACTUAL PART REFERENCE PHOTOGRAPHS
VERIFIED SOURCE FITMENT
| Make | Mitsubishi |
| Model | Outlander |
| Generation | MK3 |
| Model Years | 2013–2021 |
| Part Number | 5370B626 |
| Location | Underside / Lower Engine Bay |
BODY VARIANT CHECK — 3 DOOR vs 5 DOOR
WHERE THIS PART FITS
This component is positioned beneath the vehicle in the lower engine bay / underside area. Its function is protective rather than electronic: the moulded shield helps protect the underside of the engine compartment from road debris and contamination while the integrated openings provide designed ventilation/clearance.
WHAT THE PART DOES
This undertray does not actively control an electrical or mechanical vehicle system. It is a structural/protective underbody component. Its primary purpose is to shield the lower engine-compartment area from road dirt, water, debris and impact exposure.
- Protects the underside of the engine compartment.
- Provides a defined lower engine-bay covering.
- Uses integrated moulded mounting points/clips.
- Includes ventilation/opening sections within the moulding.
- Helps maintain the intended underbody protection and airflow path.
CONSTRUCTION & MATERIAL
The source listing identifies the part as black plastic with an unpainted finish. The integrated moulded mounting areas and ventilation openings form part of the undertray moulding.
WILL NOT FIT / EXCLUSION CHECK
The source listing confirms Outlander MK3, 2013–2021. It does not provide a VIN-level breakdown of individual facelift/build-period variations, engine combinations, transmissions or door-count variants.
Check the exact part number 5370B626, photograph the original part if possible, and verify the VIN/chassis before ordering. This is particularly important where different undertray mouldings or mounting layouts may exist within a broad model-year range.
Not confirmed from the source: individual engine codes, facelift split dates, transmission-specific fitment and exact body-style exclusions.
FITTING INSTRUCTIONS
- Raise and securely support the vehicle using suitable lifting equipment.
- Inspect the original undertray and compare its shape, openings and mounting locations with part 5370B626.
- Remove the existing undertray fasteners and retain any reusable hardware.
- Clean the mounting areas and inspect for broken or damaged mounting points.
- Offer the replacement undertray into position from underneath the vehicle.
- Align all moulded mounting points and clips before tightening fasteners.
- Fit all available fasteners and check that the panel is correctly supported.
- Carry out a final inspection to ensure there is no interference with moving or hot components.
ESTIMATED GARAGE LABOUR COST
Based on the planning allowance of 1.0 hour. This is a guide only and excludes parts, consumables and any additional repairs discovered during installation.
| Hourly Rate | Estimated Time | Estimated Labour |
|---|---|---|
| £40/hr | 1.0 hr | £40 |
| £60/hr | 1.0 hr | £60 |
| £80/hr | 1.0 hr | £80 |
| £100/hr | 1.0 hr | £100 |
We also offer professional fitting and repair services at our workshop facility, subject to availability and appointment.
WHY BUY A PREMIUM USED FACTORY COMPONENT?
A correctly matched used factory component can provide the original vehicle-specific moulding, mounting geometry and material specification without the cost of purchasing a brand-new replacement.
*Savings vary by part, supplier and market price. Always compare like-for-like specification.
From body panels and lighting to mechanical, electrical and trim components, THEPARTPILOT operates a substantial used-parts inventory.
DELIVERY & LOGISTICS
Postage is NOT free. Buyers pay the calculated delivery charge shown at checkout.
International shipping may be provided through eBay's international shipping service, including the Global Shipping Programme where it is still active on the account, with destination availability determined by eBay and listing eligibility.
International destinations can include the UK, Europe, USA, Australia, Canada and other eligible countries. The service, import charges and available destinations shown at checkout are controlled by eBay.
VAT / TAX INFORMATION
This item is sold under the VAT Margin Scheme for second-hand goods. VAT is not shown separately on the sales invoice and cannot be separately reclaimed from the purchase price. Margin-scheme invoices must not show VAT as a separate amount.
FITMENT & RETURNS — PLEASE CHECK BEFORE ORDERING
Please compare the photographs, part number, mounting points and dimensions where available with your existing component before purchase.
For buyer-remorse / incorrect-order returns, our handling will follow the applicable eBay return policy and seller-protection rules. Where a returned item is genuinely returned in a different condition, eBay currently permits eligible sellers to deduct an amount reflecting the actual loss in value; eBay's published guidance allows up to 50% in the most severe qualifying condition categories. This is not a blanket restocking charge and does not apply simply because the buyer changed their mind while the item is returned in the same condition.
Nationwide collection and same-day payment.
HOW TO FIND US / CUSTOMER SUPPORT
Please use eBay messaging for order-specific queries so your conversation and order history remain correctly connected to the transaction.
♻️ Choosing a quality recycled automotive component gives a useful part another working life, helps reduce the demand for new manufacturing and avoids unnecessary material and energy waste. 🌱 Every correctly reused component contributes to a more circular automotive economy. 🇬🇧 We are proud to support the UK automotive recycling industry and local small-business employment while helping customers repair and maintain their vehicles.