image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image

Feature:

1. APPLICABLE SCENARIO: Shower booster pump is applicable to faucet, toilet, boiler, shower, bathroom, kitchen, water heater, solar system, also used for garden nozzle, agricultural irrigation of home water supply system, etc.
2. FOUR FUNCTIONS: 1. AI intelligent learning: make effective pressurization schemes according to different water pressure conditions; 2. Intelligent start stop: when the water pump is in automatic mode, the water pump automatically starts and stops with the tap switch; 3. Low pressure start: the machine cannot start automatically after the water is too small, you can press the switch button to switch to low pressure mode; 4. Water shortage protection: the water inlet in the pump is close to zero, the pump stops working, automatic protection
3. COMPACT AND LOW NOISE: Booster pump has small size, freehand installation, you only need to use a wrench to connect the pump to the pipeline can be easily installed, simple and convenient, low noise
4. POWER AND : Mini 24V DC supercharged solar pump with 100W power and maximum rate of 25L/min with stainless steel connection pipe
5. TECHNICAL PARAMETERS: Permanent magnet brushless motor with centrifugal impeller, energy saving silent operation, and equipped with a plug, to achieve household pressure pressurization. Built in AC‑DC converter, suitable for voltage and 50Hz/60Hz frequency, applicable to various power supply scenarios
6. FULLY AUTOMATIC CONTROL: The booster pump is equipped with a smart sensor system that uses water first and then stops when the water is turned off, automatic control, easier to use water


Specification:

Item Type: Booster Pump
Current: 4.2A
Insulation Level: Class H
Protection Level: IP56
Supercharging Effect: 100Pa
Motor Power: 100w
Noise: Low pitch
Open Mode: Manual or automatic water dual control
: 25L/min
Head: Approx. 25meter / 82ft
Pipe Diameter: Approx. 15mm / 0.59in
Fluid Temperature: 0-65℃
Ambient Temperature: 0-40℃
Medium Temperature: 4-80℃
Outlet Pressure: 2bar
Maximum Pressure: 1MPa
Connection Mode: Thread


Package List:

1 x Booster Pump

1 x Power Adapter

1 x Threaded Pipe

1 x User Manual

2 x Screw

2 x Wall Plug

1 x Strong Stick