Range Rover Evoque L538 Coupé 3 Door 2011 Centre Console Cup Holder
Premium used centre-console cup-holder / console insert removed from a 2011 Range Rover Evoque Coupé L538 3-door. This is an interior trim and storage component positioned within the vehicle's central console area between the front occupants.
The component provides the factory-style cup/storage location within the centre console. No electrical control function has been established from the source listing, so it should be treated as a primarily mechanical/interior trim assembly.
Original factory-installed components are normally engineered specifically for the vehicle's surrounding trim, mounting points and interior dimensions. Buying a quality recycled component can save buyers up to 70% compared with purchasing brand new, while helping retain the vehicle's intended fit and appearance.
ACTUAL ITEM REFERENCE IMAGE
WAREHOUSE STOCK
We hold over 25,000 automotive parts on our shelves, giving customers access to a large UK-based inventory of recycled components ready for dispatch.
VEHICLE FITMENT — VERIFIED SOURCE DATA
| Make | Model | Chassis | Year Verified | Body Style |
|---|---|---|---|---|
| Land Rover / Range Rover | Evoque | L538 | 2011 | Coupé / 3 Door |
The source listing positively identifies this component from a 2011 Evoque Coupé. We do not automatically extend that compatibility across every later L538 model year.
Buyers should match 08258005 / 08258-005, inspect the fixing points, surrounding console shape and compare the supplied photographs before purchase. VIN verification is strongly recommended where any doubt exists.
3-DOOR BODY STYLE — IMPORTANT
Evoque L538 Coupé / 3 Door.
Do not assume identical fitment solely because the vehicle is also an L538 Evoque.
WHERE THE PART FITS
Interior centre console.
Cup/storage provision and associated console trim function.
No electrical system control identified from the source listing.
ITEM SPECIFICS
| Specification | Details |
|---|---|
| Brand | Land Rover / Range Rover |
| Model | Range Rover Evoque |
| Generation | L538 |
| Year Verified | 2011 |
| Body Style | Coupé / 3 Door |
| Part Type | Centre Console Cup Holder / Console Insert |
| Part Number | 08258005 |
| Reference | 08258-005 |
| Placement | Centre Interior / Centre Console |
| Condition | Used |
| Material | Not specified in source listing – inspect photographs |
| Electrical | No electrical function confirmed |
| Warranty | 30 Days |
| Universal Fitment | No |
WILL NOT FIT / DO NOT ASSUME FITMENT
- Do not assume fitment to the later L551 generation.
- Do not assume interchangeability with Evoque 5-door console assemblies.
- Do not assume facelift compatibility without matching the component number and fixing layout.
- Do not assume compatibility where your original component carries a different reference number.
- Do not rely solely on automated eBay compatibility dropdowns.
Buyers are strongly advised to compare the high-resolution photographs, mounting tabs, dimensions, surrounding trim and stamped/reference number against the part currently fitted to their vehicle.
FITTING GUIDE
Installation difficulty is normally moderate for an interior centre-console component. Exact trim-removal procedure can vary by vehicle specification.
- Park securely, switch the ignition off and remove loose items from the console.
- Protect surrounding trim using masking tape or a soft protective cloth.
- Identify the surrounding console trim panels that retain the cup-holder assembly.
- Use plastic trim-removal tools to release retaining clips carefully.
- Remove any screws or fasteners exposed beneath the surrounding trim.
- Lift the existing cup-holder/console component from its mounting aperture.
- If any connectors are present on your exact specification, disconnect them before removal.
- Compare the replacement component side-by-side with the removed item.
- Transfer any reusable clips or trim pieces if required.
- Fit the replacement unit evenly without forcing tabs or locating lugs.
- Refit fasteners and surrounding trim.
- Check operation of the sliding/storage mechanism and surrounding console trim.
Suggested Tools
- Plastic interior trim-removal tool set
- Torx driver set
- Small ratchet and socket set
- Magnetic parts tray
- Protective cloth / masking tape
- Inspection light
ESTIMATED LABOUR COST MATRIX
For simple comparison, the matrix below uses a conservative 1.0-hour workshop allowance.
| Labour Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 1.0 Hour | £40 | £60 | £80 | £100 |
We also operate a professional repair facility and may be able to fit this component for you, subject to workshop availability. Please use eBay's approved messaging system for enquiries.
PROFESSIONAL WORKSHOP
WE BUY CARS FOR CASH
Nationwide collection and same-day payment available, subject to vehicle assessment and agreed purchase terms.
DELIVERY & WORLDWIDE SHIPPING
Postage is not free. Buyers pay the calculated shipping charge displayed during checkout.
International orders may be securely shipped through the eBay Global Shipping Programme, where available for the destination. Typical serviced regions can include the UK, Europe, USA, Canada, Australia and other eligible international destinations.
Important: Customers must ensure their checkout address is correct prior to paying. Due to strict eBay Seller Protection regulations, we are entirely unable to alter or change your delivery address after purchase.
SECURE PACKING & DISPATCH
Components are packed carefully to protect mounting tabs, trim surfaces and vulnerable edges during transit.
VAT MARGIN SCHEME
RETURNS & FITMENT RESPONSIBILITY
Please verify your existing part number, body style, mounting arrangement and photographs before ordering.
Where a consumer exercises a statutory cancellation right, refunds and any lawful deduction will be handled in accordance with applicable UK consumer law and eBay policy. A deduction may be made where returned goods have suffered diminished value because they were handled beyond what was reasonably necessary to establish their nature, characteristics and function.
No fixed deduction applies automatically; any deduction must reflect the actual loss in value where legally permitted.
CUSTOMER SUPPORT
Please contact our team through WhatsApp for listing, fitment, delivery or order support.
25,000+ PARTS • PREMIUM VALUE
Extensive recycled stock held on our shelves.
Premium used components can offer major savings compared with brand-new parts.
Reusing the correct original component helps maintain the vehicle's intended mounting geometry and appearance.
RECYCLE • REUSE • REDUCE
Every serviceable vehicle component reused rather than discarded helps extend the useful life of existing materials, reduces demand for replacement manufacturing, cuts packaging and resource consumption, and keeps quality automotive parts in circulation for longer. ♻️🚗🌱
Choosing professionally recycled parts also helps support a UK automotive small business while giving perfectly usable components another productive life. Thank you for choosing THEPARTPILOT. 💚🔧