Hyundai ix35 / Kia Sportage SL 1.7 CRDi Air Intake Hose
PRODUCT IDENTIFICATION
Used 1.7 CRDi air-intake hose / turbo-inlet pipe assembly for the Hyundai ix35 LM family and Kia Sportage Mk3 SL.
This hose forms part of the engine air-intake tract and is positioned between the air-filter housing and turbocharger inlet.
Important number distinction: the physical tube carries the highly searchable reference 28138-2Y300, while catalogue-level research identifies 28130-2Y300 for the complete air-intake hose assembly. Compare both numbers, shape and connections before ordering.
PRIMARY VEHICLE APPLICATION
PART LOCATION / FITTING POSITION
HOUSING
INTAKE HOSE
INLET
Technical location schematic for identification only. Component routing can vary slightly with vehicle specification.
ITEM SPECIFICS
ENGINEERING & REFERENCE NUMBERS
| Number Type | Number | Status / Meaning |
|---|---|---|
| Complete Assembly MPN | 28130-2Y300 | Catalogue-supported intake-hose assembly number |
| Moulded / Tube Reference | 28138-2Y300 | Important number used on the physical intake tube |
| Supplier Cross-Reference | MDA1240 | Independent equivalent reference |
| Associated Branch Hose | 26710-2A650 | Related breather branch — not the full-hose interchange |
| Superseded Number | Not Verified | No reliable manufacturer supersession established |
| Replacement Number | Not Verified | Do not substitute a later-generation number |
VEHICLE COMPATIBILITY
| Make | Model | MK | Chassis | Exact Years | Engine | Body | Doors | Position | Confidence |
|---|---|---|---|---|---|---|---|---|---|
| Hyundai | ix35 | Mk1 | LM / EL / ELH | 01/2010–05/2015 | 1.7 CRDi D4FD | SUV | 5 | Air box to turbo | A — Verified |
| Kia | Sportage | Mk3 | SL | 06/2010–10/2015 | 1.7 CRDi D4FD | SUV | 5 | Air box to turbo | A — Verified |
| Hyundai | Tucson | LM market designation | LM family | 2010–2015 range | 1.7 CRDi D4FD | SUV | 5 | Air box to turbo | B — Verify VIN / number |
✓ WILL FIT
Hyundai ix35 Mk1 LM / EL / ELH — 1.7 CRDi D4FD — 01/2010 to 05/2015
Includes researched pre-facelift and facelift applications within the stated component-production range.
Kia Sportage Mk3 SL — 1.7 CRDi D4FD — 06/2010 to 10/2015
Vehicle specification, full part number, hose shape and connections must still be compared before purchase.
✕ WILL NOT FIT / CHECK CAREFULLY
Hyundai Tucson TL 1.7 CRDi 2015-on: researched later-generation applications use a different intake-hose assembly number, including 28130-D3100.
Kia Sportage Mk4 QL 1.7 CRDi from approximately 10/2015: researched QL applications use 28130-D3100 rather than this SL component.
Do not assume fitment to 2.0 CRDi or petrol engines. Do not substitute 28138-2Y310: that reference is associated with a different intake/resonator component.
This component is NOT UNIVERSAL.
⚠️ CRITICAL — CHECK YOUR PART NUMBER
Do not purchase solely from the vehicle model, registration or automated eBay compatibility information.
Manufacturers can use multiple component revisions and intake configurations within the same model and production year.
Before ordering, compare the complete stamped/moulded number, hose diameter, branch hose, connection style, clamp locations, overall shape, mounting arrangement and all actual product photographs.
Matching the complete physical reference and component geometry is one of the strongest compatibility checks.
BODY STYLE CHECK
Verified applications researched for this listing are 5-DOOR SUV / CROSSOVER vehicles.
Do not broaden compatibility to another body configuration solely because the engine is also 1.7 CRDi.
WHAT IS THIS PART?
This is the large flexible/moulded engine air-intake hose used on selected Hyundai ix35 and Kia Sportage 1.7 CRDi D4FD applications. It includes the principal air passage and the attached smaller branch/breather hose shown in the actual photographs.
WHERE IS IT FITTED?
It is fitted in the engine compartment between the air-filter / air-cleaner housing and the turbocharger inlet.
WHAT DOES IT DO?
The hose carries filtered intake air from the air-cleaner system toward the turbocharger. Its attached branch connection forms part of the associated engine-breathing/intake arrangement.
MATERIAL & CONSTRUCTION
Black moulded plastic/rubber construction with flexible corrugated sections, reinforced branch hose and metal clamping hardware.
COMMON FAILURE / DAMAGE
With age and engine-bay heat these hoses can suffer from hardened rubber, splits at flexible sections or coupling lips, abrasion, loose connections, branch-hose deterioration or corroded clamps.
POSSIBLE SYMPTOMS
Depending on where an intake leak occurs, symptoms can include an intake hiss or whistle, abnormal induction noise, reduced response, inconsistent airflow readings or engine-management faults. These symptoms can have many causes; replacing this component is not a guaranteed diagnostic repair unless the hose has been confirmed faulty.
WHAT IS INCLUDED?
The used intake pipe / hose assembly, attached branch hose and any clamps or fittings clearly shown attached in the actual sale photographs. Nothing not shown should be assumed included.
FITTING INFORMATION
General Fitting Guide
General guidance only. Fastener and clamp styles can vary. If unsure, installation by a suitably experienced technician is recommended.
STATIC LABOUR COST GUIDE
| Estimated Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 0.5–1.0 Hour | £20–£40 | £30–£60 | £40–£80 | £50–£100 |
Illustrative labour estimates only. Actual workshop charges vary according to garage, vehicle condition, location and additional work required.
PROFESSIONAL FITTING AVAILABLE
THEPARTPILOT also offers a professional fitting service at our repair facility, subject to availability.
Please contact us through eBay before purchase regarding fitting availability.
QUALITY USED COMPONENT • FACTORY FIT • VALUE
A carefully selected used factory-manufactured component can retain the vehicle-specific shape, material specification and mounting arrangement designed for the original application while offering an economical alternative to buying a new component.
*The “up to 70%” statement describes the potential benefit of the used-parts market generally. A particular percentage saving is not guaranteed on this individual item.
SHIPPING & SECURE PACKAGING
BUYER PAYS THE APPLICABLE SHIPPING CHARGE DISPLAYED AT CHECKOUT.
Automotive components are carefully packaged using suitable protective materials to help reduce the risk of transit damage.
Tracked delivery is used where applicable. UK delivery is available subject to the listing service. International availability may include supported European destinations, USA, Canada, Australia and other territories made available through eBay's international shipping programme.
International availability, delivery charge, import charges and service level are determined by the options displayed to the buyer at checkout.
⚠️ IMPORTANT DELIVERY ADDRESS NOTICE
Customers must ensure their checkout address is correct prior to paying. Due to eBay Seller Protection requirements, we cannot alter or change your delivery address after purchase.
USED GOODS / VAT INFORMATION
Where this item is supplied under the applicable second-hand margin scheme, VAT is not separately itemised and there is no separately reclaimable VAT amount shown on the invoice.
🛡️ 30-DAY WARRANTY
This listing includes the 30 Day Seller Warranty shown on the listing.
Warranty coverage remains subject to the listing terms, correct installation, correct application and applicable consumer rights.
RETURNS & FITMENT RESPONSIBILITY
Before ordering, please verify the complete part number, moulded reference, vehicle model, MK, generation, chassis, exact production period, engine, body style, hose connections, diameter, branch hose position and mounting arrangement.
Please also compare the item photographs carefully against the part removed from your vehicle.
Any deduction from a refund must comply with applicable law and eBay policy and must reflect an actual reduction in the value of the returned item where legally permitted.
🚗 WE BUY CARS FOR CASH
Nationwide collection and same-day payment available, subject to vehicle assessment and agreed purchase terms.
HOW TO FIND US / CUSTOMER SUPPORT
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
♻️ QUALITY PARTS • SECOND LIFE • LESS WASTE
Choosing a reusable automotive component helps extend the useful life of an existing part, reduces unnecessary manufacturing demand, reduces automotive waste and supports responsible vehicle dismantling and recycling.
♻️ Extends component life • 🌍 Reduces unnecessary manufacturing • 🔧 Reduces automotive waste • 📦 Encourages responsible reuse • 🇬🇧 Supports a UK automotive recycling business
BEFORE YOU CLICK BUY
Confirm that your removed component matches 28138-2Y300 / catalogue assembly 28130-2Y300, the D4FD 1.7 CRDi application, hose shape, main coupling diameters, branch connection and all photographs.
Do not use the later Tucson TL / Sportage QL application solely because those vehicles also use a 1.7 CRDi engine.