DESCRIPTION

Drywall Master DM22415 Fibreglass Plastering & Rendering Mesh – 3 Pack

Professional reinforcement for plastering, rendering and repair projects.

This 3-pack of Drywall Master DM22415 Fibreglass Rendering Mesh is designed to reinforce suitable plaster, render and external wall systems, helping create a stronger and more stable reinforced layer when correctly embedded into the basecoat.

Each roll measures 1m x 50m, with a 160g/m² weight and 4mm x 4mm mesh aperture. With three rolls included, this pack provides an impressive 150m² total mesh area, making it a practical choice for larger renovation, rendering and construction projects.

The woven fibreglass lattice is designed to be embedded into wet basecoat render. Product information describes the mesh as suitable for reinforcing external render and external wall insulation systems, particularly around openings and other areas where reinforcement is required.

⭐ Key Features & Benefits

• 3 x Drywall Master DM22415 Fibreglass Render Mesh
• 150m² total coverage across 3 rolls
• Each roll: 1m x 50m
• 160g/m² fibreglass mesh
• 4mm x 4mm mesh aperture
• White
• Designed for plastering and rendering
• Suitable for reinforcement of appropriate render systems
• Helps reinforce substrates and distribute stresses
• Suitable for larger surface areas
• Flexible woven glass-fibre construction
• Designed to be embedded into wet basecoat render
• Suitable for external render and compatible wall insulation systems
• Lightweight and practical to handle
• Alkali and corrosion resistant according to published product information

🧱 What Is Fibreglass Render Mesh?

Fibreglass render mesh is a reinforcement material incorporated into a suitable render or basecoat system.

The mesh is embedded into the wet basecoat, creating a reinforced layer within the render system. This can help stabilise the substrate, distribute stresses and reinforce areas that may otherwise be more susceptible to cracking, when installed as part of a correctly specified system.

Drywall Master describes its mesh as a flexible lattice made from woven glass-fibre strands and highlights its use in external render and external wall insulation systems.

🏗️ Ideal For

This 3-roll pack is particularly useful for:

• Plastering projects
• External rendering
• Render reinforcement
• Wall renovation
• Crack-repair reinforcement
• External wall insulation systems
• Large-area rendering
• Reinforcing around openings
• Renovation and restoration work
• Construction and building projects
• Suitable DIY rendering projects
• Professional plastering and rendering work

The product is listed by eBay under Render Mesh and Construction, with white as the product colour.

📐 Generous 150m² Total Quantity

This listing contains 3 individual 50m² rolls.

Per Roll

• Width: 1 metre
• Length: 50 metres
• Area: 50m²
• Weight: 160g/m²
• Mesh: 4mm x 4mm

Full Pack

• Number of Rolls: 3
• Total Area: 150m²

This makes the 3-pack particularly convenient for larger projects where multiple rolls would otherwise need to be purchased separately.

🔨 Application Guide

Always follow the instructions for the particular render or basecoat system being used.

1. Prepare the Substrate

Ensure the surface is appropriately prepared, sound and suitable for the intended render system.

2. Apply the Basecoat

Apply the compatible basecoat/render according to the manufacturer's instructions.

3. Embed the Mesh

While the basecoat is wet, position the fibreglass mesh and embed it into the material so it becomes properly incorporated within the reinforcement layer.

4. Ensure Proper Coverage

Make sure the mesh is adequately embedded and covered in accordance with the specifications of the render/basecoat system.

5. Allow to Cure

Allow the system to cure according to the instructions for the particular render or basecoat being used before proceeding with subsequent coats.

Important: Mesh should be installed as part of a compatible plastering/rendering system. Always follow the system manufacturer's installation requirements, including any requirements for overlaps, corners, openings and reinforcement zones.

💪 Reinforcement for Larger Areas

The 160g/m² specification and 4mm x 4mm mesh pattern provide a practical reinforcement material for suitable rendering and plastering applications.

The mesh is particularly useful across larger areas where reinforcing the render system is required. Published product information also highlights its use around openings and areas of traditional weakness.

🌐 Suitable for External Render Systems

Drywall Master information states that the mesh is suitable for reinforcing external render and external wall insulation systems.

Its glass-fibre construction is designed to provide reinforcement while remaining flexible enough to adapt to suitable substrates and installation requirements.