Clutch Double Dual Clutch Dry DPS6 Transmission Reinstall Reset Tool 307675
DPS6 Clutch Tool Dual Clutch Dry Transmission Installer Remover Kit Compatible with Ford Volvo Focus Fiesta Replacement for FM NO.307675
 Removal
1. NOTE:Only tighten the bolt finger tight at this stage.
2. Using the special tools, turn the center bolt of the special tool with a maximum of 5 Nm (44 lb-in) of torque to push the clutch down to release the pressure from the hollow input shaft snap ring.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer. Torque : 44 lb.in (5 Nm)
NOTICE: Make sure the lifting legs are installed on the clutch studs marked with the stamped manufacturing mark as shown. NOTICE: Installing the lifting legs on unmarked clutch studs will damage the pressure plate adjuster. NOTICE: Make sure the lifting leg with the angle is in the location shown. Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Turn the center bolt with approximately 5 Nm (44 lb-in) of torque until the clutch is free of the input shaft. Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer. Torque : 44 lb.in (5 Nm)
Installer
Remove special tools. Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
NOTICE: Do not overtighten the special tool or damage can occur. Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer. Torque : 44 lb.in (5 Nm)
|
- WIDE APPLICATION: Transmission installer remover tool fits for Volvo Ford Fiesta Focus, Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 Plus, for Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 DPS6 dry transmission, replace FM#307675.
- KIT INCLUDES: DPS6 clutch kit contains 1 fixed plate, 3 fixed removers, 3 round nuts, 2 dust covers, 2 input shafts, 1 electromechanical unit sleeve, 1 threaded rod, 4 long bolts, 2 short bolts, 1 gloves. All the tools have been engine tested and as accurate as OEM.
- PREMIUM MATERIAL: Dual clutch removal tool is made of high hardness heavy duty steel, sturdy and steady, black oxide coating, corrosion resistant, wear resistant, with reliable use and long service life.
- INSTRACTION: Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.
DPS6 Clutch Tool Dual Clutch Dry Transmission Installer Remover Kit Compatible with Ford Volvo Focus Fiesta Replacement for FM NO.307675
Removal
1. NOTE:Only tighten the bolt finger tight at this stage.
2. Using the special tools, turn the center bolt of the special tool with a maximum of 5 Nm (44 lb-in) of torque to push the clutch down to release the pressure from the hollow input shaft snap ring.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Torque : 44 lb.in (5 Nm)
NOTICE: Make sure the lifting legs are installed on the clutch studs marked with the stamped manufacturing mark as
shown.
NOTICE: Installing the lifting legs on unmarked clutch studs will damage the pressure plate adjuster.
NOTICE: Make sure the lifting leg with the angle is in the location shown.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Turn the center bolt with approximately 5 Nm (44 lb-in) of torque until the clutch is free of the input shaft.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Torque : 44 lb.in (5 Nm)
Installer
Remove special tools.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
NOTICE: Do not overtighten the special tool or damage can occur.
Use Special Service Tool: 307-675 Fixture, Clutch Remover/Installer.
Torque : 44 lb.in (5 Nm)
