2x Natural Nylon PA66+GF M10 x 300mm Threaded Rods, Studding + 4 Nuts
Product Highlights
- 2x Threaded Rods. 4 nuts included. Material: 30% Glass-Fibre Reinforced Nylon Polyamide 66, PA66+GF. Length: 300mm. Diameter: 10mm. Pitch: 1.5mm. SKU: 1058.
- Made from 30% glass-fibre-reinforced nylon (PA66+GF), providing greater stiffness and dimensional stability than unfilled PA66.
- Non-metallic nylon body with useful wear resistance for light-duty plastic-threaded assemblies.
- Fully threaded from end to end, so compatible M10 nuts can be positioned along the available 300mm length.
- Use for short larger-thread spacers, compact position setting and non-metallic mounting points; cut carefully and check thread engagement before final use.
Please see the technical image illustration for size references. All measurements are in millimetres/millimeters.
Product Details
- SKU: 1058
- Product Type: Threaded Rods
- Size: M10 x 300mm
- Colour: Natural
- Main Material: Nylon PA 66 / 30% Glass Fibre Reinforced
- Material 2: PA66+GF
- Quantity: 2 Pack
- Length - mm: 300 mm (L)
- Width - mm: 10 mm (W)
- Depth/Thickness - mm: 10 mm (D)
Dimensions (L x W x D mm)
300 mm (L) x 10 mm (W) x 10 mm (D)
Additional Specifications
- Washer Product Image Drawing References:
- Nut Product Image Drawing References:
- Bolt Product Image Drawing References: Material: Nylon PA66 + 30% Glass Fibre Reinforced, Head/Drive Type: Fully Threaded Rod, size: M10 x 300, D: 10 mm, Pitch: 1.5 mm, L: 300 mm
Product Description
These natural M10 x 300 mm threaded rods are supplied as a pack of two and are made from 30% glass-fibre-reinforced nylon (PA66+GF). Each rod has a 10mm nominal diameter, 300mm length and 1.5mm pitch. The glass reinforcement gives a stiffer and more dimensionally stable plastic threaded bar than unfilled PA66, while still keeping the part non-metallic and easy to cut with suitable tools. This size is useful for short larger-thread spacers, compact position setting and non-metallic mounting points, especially where a metal rod is unnecessary or undesirable. PA66+GF is harder and less flexible than plain nylon, so allow for careful cutting, clean thread engagement and suitability checks before final fitting. Use with compatible M10 nuts for light-duty spacing, alignment, mounting and general plastic-threaded assembly work. Supplied with 4 nuts.
