• Items Description:
  •  
  • Item Type: Headlight
  • Condition:  New
  • Warranty: 1 Year
  • OE Number: TO2503286/ 8111002S30
  • Quantity Sold: 1 pcs/set
  •  
  • Fitment:
  •  
  •  
  •   for Toyota Corolla LE 2020-2022
  •  
  • Package Includes:
  •  
  • 1*Right headlight
  •  
  • Tips:
  •  
  • -For other specifications of this part, please refer to the project specifications section.
  • -To confirm that the part is suitable for your vehicle, please enter the year, brand, model, interior and engine of your vehicle in the compatibility table.
  • Welcome to our store

    Wish you a happy shopping

    Headlight Assembly Headlamp Projector For Toyota Corolla 2020-2022 Right Side RH

    Items Description:

     

    Item Type: Headlight

    Condition:  New

    Warranty: 1 Year

    OE Number: TO2503286/ 8111002S30

    Quantity Sold: 1 pcs/set

     

    Fitment:

     

     

      for Toyota Corolla LE 2020-2022

     

    Package Includes:

     

    1*Right headlight

     

    Tips:

     

    -For other specifications of this part, please refer to the project specifications section.

    -To confirm that the part is suitable for your vehicle, please enter the year, brand, model, interior and engine of your vehicle in the compatibility table.

    - All services are for your better shopping experience, if you have any questions, please feel free to contact us, thank you very much!

     

    Note:

     

    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

     

    1.Find the adjustment screws:Firstly, locate the adjustment screws on your vehicle.

     

    2. Adjust the headlights individually:The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

     

    3. Adjust the vertical field:The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

     

    4. Adjust the horizontal field:The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

     

    5.Test your results:If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!


    Item Specifics
    Country of Origin United States
    Warranty 1 Year
    Brand munirater
    Manufacturer Part Number TO2503286
    Bulb Type Halogen
    Headlight Style Factory
    Placement on Vehicle Front,Right
    Housing Color Black
    Lens Color Clear
    Condition New
    Type Headlight
    Fitment Type Direct Replacement
    Certifications DOT
    Assembly Type Composite
    Dust and Moisture Protection Yes
    Mounting Hardware Included No
    Interchange Part Number TO2503286
    Other Part Number 8111002S30

    Payment

    We support multiple payment methods.

    Shipping

    Please contact us if you have special requirements (combination of packaging etc.).

    Returns
    Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.
     
    Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
     
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us

    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.

    Welcome to our store

    Wish you a happy shopping

    Shop Category
    Headlight Assembly Headlamp Projector For Toyota Corolla 2020-2022 Right Side RH

    Items Description:

     

    Item Type: Headlight

    Condition:  New

    Warranty: 1 Year

    OE Number: TO2503286/ 8111002S30

    Quantity Sold: 1 pcs/set

     

    Fitment:

     

     

      for Toyota Corolla LE 2020-2022

     

    Package Includes:

     

    1*Right headlight

     

    Tips:

     

    -For other specifications of this part, please refer to the project specifications section.

    -To confirm that the part is suitable for your vehicle, please enter the year, brand, model, interior and engine of your vehicle in the compatibility table.

    - All services are for your better shopping experience, if you have any questions, please feel free to contact us, thank you very much!

     

    Note:

     

    Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

     

    1.Find the adjustment screws:Firstly, locate the adjustment screws on your vehicle.

     

    2. Adjust the headlights individually:The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

     

    3. Adjust the vertical field:The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

     

    4. Adjust the horizontal field:The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

     

    5.Test your results:If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!



    We support multiple payment methods.

    Please contact us if you have special requirements (combination of packaging etc.).

    Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.
     
    Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
     
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.

    Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.

    We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.


    All rights reserved.



    On Aug 10, 2026 at 01:46:54 PDT, seller added the following information:

    Datacaciques