OUR TOP PICKS TO DIAGNOSE YOUR 

All In One Car Diagnostic Scanner FOXWELL NT510 Elite

FOXWELL NT510 Elite for fit for BMW is mainly developed for car owners, enthusiasts, small garages, independent repairs and technicians, which provides OE-level diagnosis on all the electronic systems. The perfect scanner for fit for BMW owners, is worth every penny, and allows you to read, clear codes from almost all fit for BMW systems and check obd system on other car makes.

• Works on some latest 2022 models. (More car diagnostic software is being continuously up--dated)
• Compatible with global OBDI/OBDII/EOBD;
• Supports full 10 OBD test modes;
• Retrieves ECU information.
• Does active test on specific systems and components.
• Reads and clears diagnostic trouble codes and resets MIL of all systems.
• Runs component/system bi-directional tests.
• Requests and records live sensor data, displays freeze frame data;
• Multi-language menus and codes definitions.
• Ergonomic design and ruggedly built for both shop and road tests.

A QUICK AND EASY SOLUTION TO SCAN YOUR PORSCH

Full System Diagnostic and Scan - FOXWELL NT510 Elite for fit for BMW

What does "Full Systems Diagnostic Scanner" mean？

There are 4 major components of a vehicle: Body, Auxiliary electrical system and electronics, Power-train and chassis and Miscellaneous auto parts

1. Body main parts: body, doors, windows control module and so on
2. Electronics includes: audio device, ignition system, lighting, sensors, electrical switches ...
3. Power-train and chassis contains: braking system, engine, exhaust system, fuel supply system, suspension and steering systems, transmission system, etc.
4. Miscellaneous auto parts: A/C , bearings, hose and other parts.

Foxwell NT510 elite for fit for BMW -- New generation full systems diagnostic scanner, supports reading codes, clearing codes and live data of all electronic control modules, bringing you cost-effective vehicle diagnosis and maintenance. This car diagnostic tool support comprehensively scanning includes Fuel system, Transmission, Engine, Body, Power train and more.It can diagnose various systems via reading and clearing DTCs data flow and then turns the warning light off.

• Airbag Control Module
• Antilock Brake System
• Tire Pressure Monitoring System
• Steering Angle Sensor System
• Electronic Parking Brake System
• Electronic Power Steering System

As well as diagnostic for drive systems include DME, DDE, EGS, VTG, BDC, EKPS, GEK and so on. And chassis includes: EMARS, VDM, ICM, DSC... Regulated Heating and A/C. Please note, the supported car system will differ from specific year and model.

MAINTENANCE FREE, CAN DO BY YOURSELF

Do Maintenance Reset By Yourself

The NT510 elite is a professional diagnostic scanner you are looking for, small size with powerful functions!

• Oil service reset is an indispensable step for car maintenance. The driven mileage or the travel time should be reset to zero after the car maintenance completed, so that the maintenance lamp can be off, while the system will apply a new maintenance cycle.
• A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine, which provides the ECU with information on whether the throttle is in the idle position, wide-open throttle (WOT) position, or somewhere in between these extremes. After the throttle is cleaned, the throttle opening needs to be re-adjusted, while the FOXWELL NT510 Elite will perform the throttle adaptation for some car models.
• Electronic Parking Brake (EPB) Service: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.
• Tire Pressure Monitoring System (TPMS) Programming: Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires sensors are replaced or rotated.
• Airbag (SRS) / Antilock Brake System (ABS) Service: Allows you to use the scanner temporarily to activate or control anti-lock brake system, airbags or components.
• Steering Angle Sensor (SAS) Calibration: Allows you to perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After calibrate sensor successfully, its fault memory will be automatically cleared.
• Brake bleeding is the procedure performed on hydraulic brake systems whereby the brake lines are purged of any air bubbles. It can be used for brake flushing or purging, where the old brake fluid is replaced with new brake fluid, which a necessary maintenance for cars.

SOLVE YOUR CAR TROUBLE WITH FOXWELL SCANNER

Full OBDII Functions for Real Road Warriors

FOXWELL NT510 elite diagnostic scanner supports 10 OBDII diagnosis service models.The obd2 diagnosis service can be supported on all cars that compliant with OBD2 protocols. Read codes, clear codes, live data, I/M Readiness,ect.

• Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.
• Reseting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.
• Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
• I/M Readiness Shows whether the various e-mi-ssions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
• On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the e-mi-ssion-related fault occurs.
• On-Board Monitor Test: Retrieves and displays test results for e-mi-ssion-related powertrain components and systems.
• Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.1.BRT, Battery Replacement