Get your APC 0U rack PDU back on the rack in seconds. These mounting peg buttons replace the small disc buttons that let a 0U PDU hang on the enclosure keyhole slots. They are the part that goes missing when a PDU is redeployed, moved between cabinets, or bought used, and without them the PDU has nothing to hang on. Printed to order in the United States by DC Additive Pros. Every pair ships with the mounting screws. HOW IT WORKS Fasten one peg to each mounting point on the back of your PDU with the included M4 x 10 mm flat head screw. The peg heads then drop into the keyhole slots in the enclosure and the PDU hangs in place. No cable channel, no bracket kit, no adapter. WHAT YOU GET Two pegs per pair, made to order in tough ABS, printed in the United States Two M4 x 10 mm flat head machine screws included with every pair Peg dimensions: head 25 mm diameter by 2.8 mm thick, shoulder 13.5 mm diameter, overall height 7 mm Free shipping COMPATIBILITY Fits APC 0U Rack PDUs across the AP75xx, AP78xx and AP79xx families, plus the AP8400, AP8600, AP8800 and AP8900 Rack PDU 2G series. DOES NOT FIT the base AP7800, AP7801, AP7900 or AP7901. Those models are different and this peg is not the right part for them. Fitment list: AP7530, AP7532, AP7540, AP7830, AP7840, AP7841, AP7862, AP7863, AP7864, AP7866, AP7866A, AP7867, AP7893, AP7930, AP7931, AP7932, AP7940, AP7941, AP7960, AP7961, AP7990, AP7991. If your model is not on this list, message us the model number before you order and we will tell you straight whether it fits. We would rather answer a question than take a return. MATERIAL ABS, printed solid. It sits well inside its service range at normal cold aisle and hot aisle rack temperatures. If your facility specification calls out a specific material rating, tell us what it is and we will quote it on a bulk order rather than guess. PACK SIZES 2 pack, mounts one PDU 4 pack, mounts two PDUs 12 pack, mounts six PDUs and drops the cost per peg for refurbishers and MSPs BULK AND CUSTOM ORDERS Need more than a dozen? We supply the standard peg in 24, 50 and 100 count boxes for refurbishers, MSPs and data center operators. Message us for bulk pricing. We also do custom work. Other APC models, other PDU brands, and nonstandard peg sizes are all made to order. Custom geometry is bulk only with a 25 piece minimum, because every custom run carries setup and engineering time. Send us the part or the dimensions and the quantity and we will quote it. FREQUENTLY ASKED QUESTIONS What are the mounting pegs on an APC 0U PDU? They are small disc buttons that fasten to the back of the PDU and let it hang on the keyhole slots in the enclosure. They are easy to lose, and a PDU without them cannot be mounted. What size is this peg? Head 25 mm diameter by 2.8 mm thick, shoulder 13.5 mm diameter, overall height 7 mm, with a countersunk hole for an M4 flat head screw. Does this fit the AP8000 series? It fits the AP8400, AP8600, AP8800 and AP8900 Rack PDU 2G series. Check your exact model against the fitment list above, and message us if it is not there. Does this fit an AP7900? No. The base AP7800, AP7801, AP7900 and AP7901 are not covered by this part. Message us with your model and we will tell you what you need. Are the screws included? Yes. Every pair ships with two M4 x 10 mm flat head machine screws. Do you offer bulk or custom orders? Yes. Standard pegs come in 24, 50 and 100 count boxes, message us for pricing. Custom sizes, other PDU brands and nonstandard geometry are made to order in bulk only, 25 piece minimum, because each custom run takes setup and engineering time. Where are these made? Every peg is 3D printed to order in the United States by DC Additive Pros. Compatible with APC brand PDUs. DC Additive Pros is not affiliated with, authorized by, or endorsed by Schneider Electric or APC. APC, NetShelter and all model numbers are trademarks of their respective owners, referenced here only to indicate fitment.