This is a set of torque plates for 2002-2003 Indian Powerplus 100 cylinders. These were custom machined specifically for Indian cylinders, so they are probably quite rare.

The bottom plate has been surface ground top and bottom to keep the bore perpendicular to base when boring cylinders. Bottom plate is 6" square with a spigot bore of 4.196" and .482" thick. Threads are 7/16-20 which for use with the same bolts as used with S&S torque plates.  Bottom plate is also machined so you can bolt on the steel tabs that come with S&S torque plates for mounting the torque plates in a vise.

The top plate is also 6" square but has a bore of 3.948" and is .708" thick. It also has two .450" holes to straddle the oil drain dowels. 

I'm all through boring Indian cylinders so I hope someone else will be able to make use of them.

I ask that you please consult the pictures, do your own research on suitability, and ask questions if needed, because I am not going to accept returns on these parts except in case of a mistake on my part. They are being sold "as is."

Shipping costs are beyond my control. I weigh the parts and try to select the most reasonable shipping methods based on size and weight, and when possible offer a couple options.  I do not add a handling charge, or inflate the shipping cost to increase profits.

As always, these parts are available for inspection and for local pickup (to avoid shipping costs) at Lee's Speed Shop, 8320 Co. Rd. 52, Carver MN