Data recording, statistical analysis, trend-chart visualization, and Pass/Fail batch comparison are built in. For R&D bench validation, burn-in monitoring, and small-batch quality control where a basic 4½-digit meter lacks the recording-and-statistics workflow but a 6½-digit unit would be overkill, the UT8804E delivers measurement, logging, and analysis in one instrument. Thermocouple temperature measurement, multiple parameters per measurement function and USB-Device PC connectivity are standard.
The UT8804E delivers a 4⅚-digit 59,999-count display with 0.025% basic DC voltage accuracy. DC voltage resolution is 0.001 mV and DC current resolution is 0.01μA — covering the precision needed for component validation, prototype bring-up, and general bench measurement. Resistance resolution is 0.01Ω.
Measurement coverage includes AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity, frequency, duty cycle, temperature [thermocouple]. Capacitance measurement extends to 60 mF. Frequency counter range is 60 Hz – 60 MHz.
True-RMS AC measurement delivers correct readings on distorted, non-sinusoidal waveforms — switching-mode power supply outputs, motor-drive currents, dimmed lighting loads, PWM signals — where an average-responding meter would read low. AC voltage and AC current measurements are both True-RMS.
Data recording captures historical measurements with real-time access to the current sample count, recording duration, extreme values, and averages. Recorded data renders as both statistical summary and trend chart; the cursor on the trend chart returns the value at a specific time point, useful for isolating anomalies in time-varying signals.
For each measurement function, the UT8804E exposes multiple parameter selections — for example, capacitance measurement can also display dissipation factor [D] or quality factor [Q] as a secondary parameter. The dual-parameter readout reduces function-key presses on multi-step measurement tasks and keeps both values visible during recording.
Pass/Fail comparison sets a tolerance window around an expected value; readings outside the window trigger an audible alarm and a visual indicator. For batch production-test work — incoming component inspection, finished-board QC, post-burn-in verification — Pass/Fail flagging removes the operator-attention burden of reading the numeric display on every part.
Maximum, minimum, and average value statistics track measurement extremes across a batch or time window. Each extreme reading is timestamped, so the trend chart cursor can return both the value and the moment it occurred — useful for isolating intermittent events in long-running tests.
Thermocouple temperature measurement covers the range -40°C to 1000°C with built-in cold-end compensation. Suitable for component-thermal-test, environmental monitoring, and process-temperature verification.
USB-Device connection to a host PC enables real-time historical-data viewing, trend-chart display, and configuration backup through the included software. For workbench logging and remote monitoring of long-running tests where a separate data logger would be overkill, USB-Device provides the path.
| Display Digits | 4⅚ [4.8] |
| Resolution Count | 59,999 |
| Basic DC Voltage Accuracy | 0.025% |
| DC Voltage Resolution | 0.001 mV |
| DC Current Resolution | 0.01μA |
| Resistance Measurement Resolution | 0.01Ω |
| Maximum Reading Rate | 3 rdgs/s |
| True-RMS | Yes |
| Auto-Ranging | Yes |
| Capacitance Range [max] | 60 mF |
| Frequency Counter Range | 60 Hz – 60 MHz |
| AC Frequency Response | 100 kHz |
| Temperature Range | -40°C to 1000°C |
| Math / Statistics | Max/Min/Average, Pass/Fail, Relative |
| Internal Storage | 20k |
| Display | 4.3in TFT LCD |
| Touch Screen | No |
| Interface | USB-Device |
| Certifications | CE | cETLus |
The UT8804E is the mid-tier Advanced model: 4⅚-digit precision with True-RMS, auto-ranging, a 4.3-inch TFT-LCD, data recording with trend-chart display, and Pass/Fail batch comparison. It sits between the Classic UT8803E and the Performance-cohort UT8805E. If your work needs SCPI automation, fast reading rates, or four-wire resistance, step up to UT8805E or UT8806E.
Yes. The USB-Device port connects the UT8804E to a host PC running the included software, which provides real-time historical-data viewing, trend-chart display, and configuration backup. The software is included free of charge; firmware updates over the product's lifetime are free.
Yes — every UT8804E ships with a factory calibration certificate. The recommended recalibration interval is once per year for metrology-traceable measurement applications. For routine workbench use where the meter is being used for relative comparisons or go/no-go checks against known references, longer intervals are acceptable. Recalibration is performed through Uni-Trend or an accredited third-party calibration laboratory.
The UT8804E ships with the standard probe and lead set appropriate to its measurement range, a power cord, the USB-Device cable for PC connection, the included software disc or download link, a user manual, and the factory calibration certificate. Verify the included contents against the packing list on delivery.