Headlights and Taillights ---CCIYU
Specifics and Features:
1: Impact resistant and tough:Made with a durable polycarbonate lens, it is effective against the abuse of road debris and the impact of tree branches on the trail, and the high-impact housing is also better equipped to withstand the shock and vibration of off-road adventures.Visibility,which is vital for navigation in adverse weather conditions, including rain, snow and thick fog, can be increased.
2: Safe and durable :Our ABS plastic housing/polycarbonate lenses provide strong impact resistance and high temperature resistance.Fully sealed construction with solid silicon prevents moisture from being trapped inside the housing and provides reliable service in a variety of weather conditions, including rain, snow, or sandstorms.
3: After-sales service: If you have any questions after receiving the product, please promptly send your inquiries (preferably with pictures). We will reply to you as soon as possible and ensure that you are satisfied with the shopping experience.
Easy to install:
Step1: Undo the screws, clips, or retainer springs that hold the light in place.
Step2: Disconnect the wiring from the assembly.
Step3: Detach the light from the vehicle to replace it with a new one.
Step4: Fit in the new headlight assembly.
Step5: Fix the new light into place and make sure that the screws, clips, or retainer springs are sealed.
Step6: Reconnect the wiring that was unplugged from the assembly.
Step7: Put back the grille and other components that you removed. Seal them back into place.
Step8: Test the new assembly.
Professional installation is highly recommended!
How To Buy The Suitable Car Lights?
Note 1: Please check the year, brand, model and installation position of your vehicle, and compare it with our store's products to confirm whether your original factory headlights are the same as ours, and that all the details of the plugs are consistent.
Note 2: If you are unsure, you can send us a message for confirmation and provide your vehicle's VIN number or year, engine model and vehicle type. Inform us of the product you are interested in, and we will query the accessory information for you and reply to you as soon as possible.
How to adjust the light source problem?
Each headlamp has the function of adjusting the light type, using the tool to adjust the adjustment knob (or screw) behind the headlamp assembly, by rotating the knob to change the large light type, it is recommended that the night test effect is better.
How to solve the problem that the light bulb does not light?
1: Check if the bulb is in good condition. If necessary, replace it with a new one of the same model. If you are unsure about the model, please contact for confirmation.
2: Check whether the cable socket has water or loose, you can remove the corresponding functional plug and plug it in again to observe, or it may be the plug pin contact is poor resulting in no power, check whether the cable is correct, if the cable is normal, it may be the circuit board problem.
3: Check whether the assembly wiring harness plug has retreated, and the plug pin has retreated inward.
How to solve the problem of fog caused by water?
1: In cold weather or when the vehicle experiences rapid temperature changes.
2: Imperfect seal: Check whether the seals or seals around the headlight assembly are damaged or improperly installed.
3: The ventilation system is blocked or does not work.
4: Condensation does not mean that the accumulation of condensate inside the broken headlamp is a normal phenomenon. Condensation occurs for a number of reasons, such as temperature differences, and the absorption of water by areas of low pressure in winter. It does not affect the optical function of the headlights/taillights.