Usefull Links

Store Newsletter

Add my Shop to your Favorites and receive my email newsletters about new items and special promotions!

Trusted Seller

Secure Payments

Fast Delivery

DESCRIPTION

Introducing ArctiClean, the first retail product to emerge from the union of Arctic Silver and Nanotherm technology. ArctiClean is a two-step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material.

Unique 2-Step Process:

ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum.

ArctiClean 1 Thermal Material Remover:

ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardsous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.

ArctiClean 2 Thermal Surface Purifier:

The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface material and the heatsink.

Using ArctiClean 2 With Other Solvents:

Most solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.

Why Not Just Use Isopropyl Alcohol or Acetone?

Put isopropyl alcohol or acetone on a thermal pad and 10 minutes later you will have a thermal pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Although less visible, it is the same cleaning thermal greases with alcohol or acetone. ArctiClean 1 totally emulsifies thermal pads and thermal greases. The waxes, oils, and fillers of the thermal material are suspended within the ArctiClean 1 so they can be cleaned off completely. This emulsification allow ArctiClean to remove the thermal material in the microscopic imperfections in the heatsink or heat spreader that non-emulsifying cleaners cannot touch. The flash corrosion inhibitors in ArctiClean 2 then significantly reduce the corrosion layer on the copper or aluminum, improving the interface between the metal and the new thermal material and maximizing thermal transfer.

Compliancy:

RoHS Compliant.

FEATURES

Unique 2-Step Process

ArctiClean 1 Thermal Material Remover

ArctiClean 2 Thermal Surface Purifier

Using ArctiClean 2 With Other Solvents

Why Not Just Use Isopropyl Alcohol or Acetone?

Compliancy

SPECIFICATIONS

MPN:

ACN-60ML

Net Volume:

Part A = 30ml, Part B = 30ml

Colour:

Part A = Pale yellow, Part B = Colourless

Form:

Part A = Liquid, Part B = Liquid

Odor:

Part A = Citrus, reminding of orange peel, Part B = Mild

Odor Threshold:

Part A = Not dertermined, Part B = Not dertermined

PH-Value:

Part A = Not determined, Part B = 7.5

Melting Point/Melting Range:

Part A = Not determined, Part B = Not determined

Boiling Point/Boiling Range:

Part A = 173 °C (343 °F), Part B = 34 °C (93 °F)

Flach Point:

Part A = 91 °C (196 °F), Part B = Not applicable

Flammability (Solid, Gaseous):

Part A = Not applicable, Part B = Not applicable

Ignition Temperature:

Part A = 255 °C (491 °F), Part B = 270 °C (518 °F)

Decomposition Temperature:

Part A = Not determined, Part B = Not determined

Auto Ignighting:

Part A = Product is not self-igniting, Part B = Product is not self-igniting

Danger of Explosion:

Part A = Not determined, Part B = Product does not present an explosion hazard

Lower Explosion Limits:

Part A = 0.7 Vol %, Part B = 0 Vol %

Upper Explosion Limits:

Part A = 6.1 Vol %, Part B = 0 Vol %

Vapor pressure @ 20 °C (68 °F):

Part A = 2.3 hPa (2 mm Hg), Part B = 23 hPa (17 mm Hg)

Density @ 20 °C (68 °F):

Part A = 0.85 g/cm³ (7.093 lbs/gal), Part B = 1.01 g/cm³ (8.21lbs/gal)

Relative Density:

Part A = Not determined, Part B = Not determined

Vapor Density:

Part A = Not determined, Part B = Not determined

Evaporation Rate:

Part A = Not determined, Part B = Not determined

Solubility in / Miscibility with Water:

Part A = Not miscible or difficult to mix, Part B = Part A = Fully miscible

Partition Coefficient (N-Octanol/Water):

Part A = Not miscible or difficult to mix, Part B = Not miscible or difficult to mix

Dynamic Viscosity:

Part A = Not determined, Part B = 1 mPas

Kinematic Viscosity:

Part A = Not determined, Part B = Not determined

Organic Solvents Content:

Part A = 85.0 %, Part B = 2-5 %

VOC Content:

Part A = 85.0 %, Part B = <2 %

Water Content:

Part A = N/A, Part B = 94-97 %

Solid Content:

Part A = N/A, Part B = <1 %

Returns

We offer a 30 Day Money Back Guarantee. If you are unhappy with your purchase for any reason, you can return it to us within 30 days from the date you received it for a full refund. Returned items must be unopened and unused in original undamaged packaging. You are responsible for the cost of returning items back to us unless they are faulty. Software that is open cannot be returned for any reason.

Delivery

We use a variety of different carriers to fulfil orders. An opportunity to select a preferred delivery method is given at checkout, however we reserve the right to use other methods or carriers without notice. eBay offers estimated delivery dates, however please remember these are only estimated and not guaranteed delivery dates. We do our best to dispatch orders on time, however sometimes orders may be delivered faster or slower than the estimated dates given by eBay.

Payment

We accept PayPal as the prefered method of payment. We also accept all major credit and debit cards through PayPal without the need for a PayPal account. Payment is to be completed at the time of ordering. Payment must be completed before an order is dispatched.

Feedback

Feedback is very important to us and we always do our best to earn 5 stars from our customers. If for any reason you feel we do not deserve 5 stars then please contact us before you leave feedback and give us a chance to make things right. Feedback is for reviewing the seller and not the product purchased. Please do not leave negative or neutral product reviews instead of seller feedback, as this negatively affects us as a seller. There is a separate area to leave a product review if you wish.