Key Features:

Consistent High Flow Output: The standard 1.26-inch port provides a steady, high-volume water flow even under strong pressure, ensuring a smooth water supply for household use.

Advanced Filtration Design: Featuring a 316 stainless steel filter with 40μm accuracy, this filter effectively captures fine impurities and helps protect downstream water appliances.

Zero-Electricity Consuming: Without the need for electricity or external power, it runs solely on water pressure, offering an efficient and energy-saving filtration solution.

Convenient Self-Cleaning Function: You can simply open the drain valve to flush accumulated debris from the stainless steel screen, enabling easy cartridge cleaning without disassembling pipes or housing.

Cost-effective: After flushing out the accumulated sediment, the filter can be used again, saving you money on replacement filters. Moreover, it can effectively reduce the cost of repair and replacement of appliances due to water quality problems.

Details:

Convenient Pressure Gauge: It shows live water pressure for convenient oversight.

User-safe Edges: The smooth edges prevent cuts and scratches during daily interaction, combining safety with sleek design.

Application:

It protects and extends the life of your standard filters by removing the large dirt, sand, and rust particles before they reach the rest of your plumbing system, including water softeners, water filtration, water purifiers, water heaters, wall-hung boilers, washing machines, shower heads, and expensive appliances.

Specifications:

Material: 58-3 Environmentally Friendly Copper, 316 Stainless Steel, PC
Color: Clear, Coppery, Blue
Process: Copper Precision Processing
Assembly Required: Yes
Applicable Water Pressure: 0.1-0.8MPa
Applicable Temperature Range: 0-60°C/32-140°F
Daily Processing Capacity: 32L/8.45Gal
Water Outlet Mode: Single Outlet
Water Production Capacity: 3T/792.52Gal /H
Pressure Range: 1-20bar/14.5-290.1PSI
Pressure Loss: 0.5bar/7.25PSI
Filtration Precision: 40μm
Interface Internal Thread Size: 19.05mm/0.75in
Interface External Thread Size: 32mm/1.26in
Installation Height above Ground: 10cm/3.94in
Product Size(L*W): 21*8.6cm/8.27*3.39 in
Package Size: 27*15*9cm/10.63*5.91*3.54in
Gross Weight: 0.95kg/2.09 lbs

Package Included:

1* Pre-filter
1* Pressure Gauge
1* English Manual
All Accessories for Use

Notes:

1. Please do not use it for wastewater or corrosive liquid.
2. Please check that the direction of the water flow marked on the product body is consistent with the flow direction of the water pipe.
3. Please note that this product comes with 1.26in interfaces and 0.98in connectors. If you need 0.79in connectors or 0.79in PPR Live connectors, please purchase by yourself.
4. Please note that all installation, testing, and maintenance should be carried out by professionals.
5. If the contaminants in your water are too many or too large, we recommend you choose a larger micron filter or larger spin-down sediment water filtration. Please install it 3.94in from the ground.
6. It is recommended that the cycle of backwashing is 15-30 days, just open the drain valve for at least 30 seconds to self-flush and clean the whole system to ensure the filtering effect.
7. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.