Menzerna 1000, 2500, 3500, Heavy Cut Compound, Medium Cut Polish, Swirl Remover

German Menzerna Car Body Paint Heavy Cut Rubbing Compound 1000. 250ml 

 

Heavy Cut Compound 1000 is specifically designed to quickly eliminate sanding marks, buffer trails and random deep scratches (RDS). The lubricating oils allow for longer working times and produces minimal dust.

Features & Benefits:

• Abrasive particles remove overspray, sanding marks, scratches & buffer trails.
• Produces an even sanding effect.
• Use with hard compounding pad.
• Free of oil silicone and fillers.

Directions for use:

• Ensure area to be corrected is clean, dry & cool to the touch.
• Use a hard compounding pad.
• Apply 1-2 pea-sized drops to the pad.
• Place pad against the paintwork & use a lower speed to spread product.
• Increase speed to 3-4 & work product until only a film remains.
• Wipe residue using a clean, soft microfibre.

Technical Specification:

• Cut: 9/10
• Gloss: 3/10
• Suitable for hard paint finishes only
• Suitable for use only with a rotary machine polisher
• Contains diminishing abrasives

German Menzerna 2500 Car Body Paint High Gloss Medium Cut Polish. 250ml

Removing sanding marks, particularly from softer paint finishes can be tricky as the more aggressive abrasives the greater the likelihood of incurring micro-marring.

Menzerna Medium Cut Polish is specifically designed to work well with soft paintwork. Containing diminishing abrasives and lubricants, Medium Cut Polish can be worked for longer to ensure abrasive particles break down fully, eliminating both sanding marks and blemishes, leaving a shinier finish without micro-marring.

Features & Benefits:

• Works well with soft paint finishes.
• Free of oil silicone and fillers.
• Lubricating oils allow for longer working times
• Does not contain fillers - minimal drop-back.
• Eliminates sanding marks on softer paints.
• Suitable for the removal of light defects on scratch-resistant paints.

Directions for use:

• Ensure surface is clean, dry & cool to the touch.
• Apply to a medium or hard foam polishing pad or lambswool pad depending on the requirements of the job.
• If using a DA polisher, apply 3-4 pea-sized drops to the pad.
• If using a rotary polisher, apply 1-2 pea-sized drops to the pad.
• Place pad against paintwork & work at low speeds to spread compound.
• Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary), gradually speeding up to refine out.
• Wipe residue with soft microfibre.
• Can also be applied by hand with a foam applicator.

Technical Specification:

• Cut: 5/10
• Gloss: 7/10
• Water based
• Suitable for use with DA, rotary or by hand
• Suitable for all types of paint finish
• Contains diminishing abrasive particles

Menzerna Super Finish 3500

By using a powder fine abrasive, the polish will see off fine swirls and defects and leave you with the most reflective and glossy surface imaginable. Menzerna claim that the abrasives are the smallest and most uniform in the world, these particles have a sharp edge that can cut ceramic clear coats as well as the more conventional clear coats. This means that you get the most stunning shine and gloss imaginable, whilst still being able to remove light imperfections.

Menzerna Super Finish was developed to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other cerami-coat finishes. It is however becoming widly adopted as the new standard in finishing polishes.

Menzerna Super Finish 3500 will leave your paint with a mirror shine!

Technical Specification:

• Cut: 3/10
• Gloss:10/10
• Water based
• Suitable for use with DA, rotary or by hand
• Suitable for all types of paint finish
• Contains diminishing abrasive particles
• Free of silicones and fillers
• 250ml bottle