Application for:
For Honda Odyssey 2011-2017
Description:
Condition: 100% Brand New
Type: Control Arm & Ball Joint Assembly
Placement on Vehicle: Front/Lower/Forward/Outer/Inner
Fitment Type: Direct Replacement
Manufacturer Warranty: 1 Year
Part Number:
K622002/K622210/ES800333/EV800909/K750304/MS601119/MS601118
Properties & Material
- High Quality,Brand New Control Arms Part.
- High Quality Metal Material,Improve the Feeling of Riding.
- Superior Strength and Durability,Avoid Tilt of the Car When Turning.
Package Include:
2× Rack and Pinion Bellow
1× Front Lower Control Arm and Ball Joint - Driver Side -K622002
1× Front Lower Control Arm and Ball Joint - Passenger Side -K622210
2× Front Outer Tie Rod End -ES800333
2× Front Inner Tie Rod End -EV800909
2× Front Sway Bar End Link -K750304
W/O Product Instruction
Note:
Please make sure the part numbers matches the part you are replacing.Please be very careful to check our photos, make sure the photo showed is same as you wanted.
If you are not certain about compatibility of the parts you wish to purchase, send us your VIN.
Why replace Suspension Kit？
1、Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle.The worn components or the entire arm,must be replaced.
2、Vehicle won't track straight or pulls to one side. A car will not trackstraight and may require constant steering correction if there is a worn,bent,or loose controlarm.
3、Clunking or squeaking noise.Aloose contro arm, or a control arm with dried out, rotted orloose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
4、Vehicle pulls to one side only when braking.Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.
It's Time To Replace Your Suspension Kit
1.When the car driving in motion situation, feel that the two front wheels are swaying from side to side and the steering wheel is diffcult to grasp.
2.The sway bar link was damaged, the vehicle will turn in the direction, the roll amplitude wil increase. when driving in extreme roads and it easy to make the car overturn.
3.The ball head damage will cause slight displacement of the suspension, resulting in errors in the four-wheel positioning data, which will lead to tire wear and direction deviation
4.control arm was damaged and caused wheel wear,When passing over a bumpy road surface there may be enough movement to cause a perceptible noise from the suspension system.
5.The car doesn't turn enough when turning.
