Large capacity, bench top planer thicknesser.
10” Planing Capacity
10” x 5” Thicknessing Capacity
Aluminium Tables To Minimise Weight
Extruded Guide Fence For Accuracy
Tilting Fence With Twin Guides
Rubber Coated Feed Rollers
100mm Diameter Chip Extraction Outlet
The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.
The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks.
The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes.
As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run.
Supplied with re-grindable blades, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, 2.0m power cable and UK 3 pin plug.
Charnwood PT250 Specification
Surfacing width 252mm (10″)
Maximum planing depth of cut 2mm
Fence tilt 90 – 45
Table height 360mm
Thicknessing capacity 5 – 125mm (1/4″ – 5″)
Length of thicknessing table 270mm
Feed speed 8m/min
Maximum depth of cut 2mm
Cutterblock speed 9000rpm
Motor (carbon brush) 1500w (2hp), 240v
Dimensions (WxDxH) 945mm x 470mm x 480mm
Weight 30kg
Rating Hobby
