ANCEL JC200 2-Cylinder Injector Cleaner Tester Machine for Car & Motorcycles, Pressure Adjustment ,Built-in Air Pump ,  Compatible with Φ9–14.5mm injectors, suitable for most 6V&12V gasoline vehicles and motorcycles. Faster, Smarter, Better

🔥 Main Functions
✅ (1) Uniformity test: to check uniformity of the injections.
✅ (2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
✅ (3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure.
✅ (4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.

🔥 Main Features
✅ (1) Low-cost solution of injection test.
✅ (2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.
✅ (3) DC12V power supply, enhance portability of the product.
✅ (4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.
✅ (5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.
✅ (6) Replaceable composite joints for different injector type.

🔥Technical Specifications
Relative humidity: <85%
Environment temperature: -5oC ~ + 50oC
Tank Capacity: 150ml
Cylinder Volume: 100ml
RPM: 100~9900 step 100
Time: 30~600 Seconds
Oil Pressure: 1.2~1.5bar (Fixed)
Test Model: Auto&Manual

 🔥 Packing List:
1X  Main Unit
1X  Power Cord
1X  Signal Cord
1X  Base Plate
1X  Lock Thread
1X  Lock Nut
1X  Fuel Distribution Rail
2X  Glass measuring cylinder
2X Ф9-11.3 adapter w/z 0-ring
2X Ф11-12.8 adapter w/z 0-ring
2X Ф13-14.5 adapter w/z 0-ring
2X Ф10 washer
2X Ф14 washer
1X Block screw 

🔥 Operating Instructions
✅ 1. Button Functions:
a) -: Time adjustment / Speed adjustment.
b) +: Time adjustment / Speed adjustment.
c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).
d) START: Start/Stop key, short press to start when stopped, short press to stop when running.
✅ 2. Indicator Functions:
a) M: Manual mode.
b) A: Auto Mode.
✅ 3. Operation Instructions:
a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed.
b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.