10-Inch 320W Portable Utility Blower Fan with 16 ft PVC Duct (Model SHT-25)

Powerful, portable ventilation for tight, hot, or dusty work areas — designed to move high volumes of air where you need it. ⚡️

Key Features

• Strong motor: 320W pure copper motor, 3,300 RPM with ball bearings for steady performance.
• High airflow: 1518 CFM / 43 m³/min and 294 Pa pressure for effective extraction in confined spaces.
• Durable construction: Steel, PVC, copper, nylon, die-cast aluminum and rubber with painted/plastic-sprayed surfaces for wear resistance.
• Safety features: IP44 protective level, anti-leakage plug and two high-density protective covers to keep debris and hands out.
• Portable & flexible: Detachable, foldable 16 ft (5 m) anti-flame, wear-resistant duct with steel wire springs; anti-slip top handle and four curved legs with pads for stability.
• User-friendly: 8.2 ft (2.5 m) power cord, simple switch control, and reset/testing functions for quick setup.

Overview

This compact horizontal cylinder blower directs focused, high-volume airflow to remove smoke, dust, fumes, or hot air from workshops, basements, construction sites, tunnels and similar indoor spaces. The detachable duct directs air precisely; its smooth, waterproof inner wall and D-rings (every 1 m) allow hanging or secure fastening. 🔧

Materials and protective covers are selected for demanding environments. The long power cord and comfortable handle make relocation easy. Outer surfaces wipe clean with a damp cloth for simple maintenance.

Specifications

Model	SHT-25
Power	320W
Voltage / Frequency	110V / 60 Hz
Current	3.191 A
Motor speed	3300 RPM
Air flow	1518 CFM / 43 m³/min
Pressure	294 Pa
Noise	70 dB(A)
Blades / Bearing	7 blades / Ball Bearing
Protection level	IP44
Power source / Plug	AC (US standard plug)
Usage / Mount	Indoor / Free Standing
Controller	Switch Control
Color	Yellow
Materials	Steel, PVC, Copper, Nylon, Die-cast aluminum, Rubber
Surface treatment	Painting, Plastic Spraying
Assembly required	Yes
Duct	Expands to 5 m / 16 ft, thickness 0.3 mm / 0.012 inch; temperature range -15–85℃ / 5–185℉; ring spacing 1 m / 3.28 ft
Power cord length	2.5 m / 8.2 ft
Weight (gross)	11.5 kg / 25.35 lbs
Product size	31.5 × 32 × 37 cm / 12.4 × 12.6 × 14.57 inch
Package size	41 × 37 × 50 cm / 16.14 × 14.57 × 19.69 inch

Package Included

• 1 × 10-inch Utility Blower Fan (Model SHT-25)
• 1 × 16 ft (5 m) PVC ducting

Usage Tips

• Secure duct connections with the supplied adjustable rope and D-rings to maintain a tight seal. 🔩
• Place the fan on a flat surface and use anti-slip pads to reduce vibration.
• Use the fan to exhaust fumes or bring fresh air in — point the duct toward the area to be ventilated.
• Avoid prolonged operation near open flames despite the duct’s anti-flame properties.

Care & Maintenance

• Unplug before cleaning. Wipe the outer surface with a damp cloth to remove dust. 🧼
• Inspect the duct and power cord regularly for wear; replace if damaged.
• Store the duct detached and loosely coiled to prevent permanent kinks.

Important Notes

• The duct will automatically extinguish within three seconds after leaving an open flame (as stated in the original listing).
• Allow 1–3 cm tolerance for manual measurements and expect slight color variation from photos.

Ready to improve ventilation at your job site? Add this portable blower to your cart for reliable airflow where you need it. ✅