• Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. If you are not sure if this model is right for you, please feel free to contact us.
  •  
  • Description:
  • This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

    • ALL-CARB 21GPM 2 Spool Hydraulic Directional Control Valve W/Joystick 3625PSI

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Description:

    This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

    2 Spool valve with compact design allows for installations in tight areas
    All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
    Used for open center systems (Pump to Tank Flow) 
    Anti-drop load checks on each spool
    Precision ground and hard chrome-plated spools assure a long life
    High-tensile strength cast iron monoblock construction
    SAE O-Ring ports ensure solid seal and prevent blockages
    Capable of Closed Center or Power Beyond (conversion plug required)
    Vertical or horizontal handle mount
    Adjustable Relief Valve Range:  1500 to 3625 PSI
    Used as motor or single-acting spool possible (#10 SAE port plug required)

     

    Benefits:

    Double Acting :Hydraulic control valve for operating double acting cylinders.

    Durable Quality :This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use.

    Spring Return :All spools are standard double acting with spring return to the neutral position which is ideal for double-acting cylinders.

    High-Efficiency : The relief valve range is up to 3625 PSI and the maximum flow is up to 21 GPM.

    Wide Application :Fit for small tractors, tractors loaders, log splitters, and etc.

     

    Suitable for:

    Operate hydraulic cylinders (Double-Acting or Single-Acting)
    Operate hydraulic motors ("D" Spool Required)
    Install rear remotes on a tractor

     

    Features:

    Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating: 21 GPM (80 l/min)
    A & B Work Ports:  #10 SAE O-Ring (7/8”-14) Thread
    Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
    Outlet Port: #12 SAE O-Ring (1-1/16”-12) Thread
    3 – 5/16” Mounting Holes

    Port Sizes: PT: 7/8" NPT, AB: 3/4" NPT, Port C: 7/8" NPT

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!

     

    Includes:

    1×2 Spool 21GPM Hydraulic Directional Control Valve 


    Item Specifics
    Country of Origin United States
    Brand ALL-CARB
    MPN MOT1581732
    Spool Count 2-Spool
    Maximum Flow Rate 21 gpm
    Valve Operation Manual
    Max Operating Pressure P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating 21 GPM (80 l/min)
    A & B Work Ports #10 SAE O-Ring (7/8"-14) Thread
    Inlet Por #10 SAE O-Ring (7/8"-14) Thread
    Outlet Port #12 SAE O-Ring (1-1/16"-12) Thread

    Payment
    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Shipping
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Returns
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.
    Feedback

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    ALL-CARB 21GPM 2 Spool Hydraulic Directional Control Valve W/Joystick 3625PSI

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Description:

    This monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.

    2 Spool valve with compact design allows for installations in tight areas
    All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
    Used for open center systems (Pump to Tank Flow) 
    Anti-drop load checks on each spool
    Precision ground and hard chrome-plated spools assure a long life
    High-tensile strength cast iron monoblock construction
    SAE O-Ring ports ensure solid seal and prevent blockages
    Capable of Closed Center or Power Beyond (conversion plug required)
    Vertical or horizontal handle mount
    Adjustable Relief Valve Range:  1500 to 3625 PSI
    Used as motor or single-acting spool possible (#10 SAE port plug required)

     

    Benefits:

    Double Acting :Hydraulic control valve for operating double acting cylinders.

    Durable Quality :This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use.

    Spring Return :All spools are standard double acting with spring return to the neutral position which is ideal for double-acting cylinders.

    High-Efficiency : The relief valve range is up to 3625 PSI and the maximum flow is up to 21 GPM.

    Wide Application :Fit for small tractors, tractors loaders, log splitters, and etc.

     

    Suitable for:

    Operate hydraulic cylinders (Double-Acting or Single-Acting)
    Operate hydraulic motors ("D" Spool Required)
    Install rear remotes on a tractor

     

    Features:

    Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating: 21 GPM (80 l/min)
    A & B Work Ports:  #10 SAE O-Ring (7/8”-14) Thread
    Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
    Outlet Port: #12 SAE O-Ring (1-1/16”-12) Thread
    3 – 5/16” Mounting Holes

    Port Sizes: PT: 7/8" NPT, AB: 3/4" NPT, Port C: 7/8" NPT

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!

     

    Includes:

    1×2 Spool 21GPM Hydraulic Directional Control Valve 

    Item Specifics
    Country of Origin :United States
    Brand :ALL-CARB
    MPN :MOT1581732
    Spool Count :2-Spool
    Maximum Flow Rate :21 gpm
    Valve Operation :Manual
    Max Operating Pressure :P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
    Flow Rating :21 GPM (80 l/min)
    A & B Work Ports :#10 SAE O-Ring (7/8"-14) Thread
    Inlet Por :#10 SAE O-Ring (7/8"-14) Thread
    Outlet Port :#12 SAE O-Ring (1-1/16"-12) Thread


    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.

    On May 23, 2026 at 06:04:59 PDT, seller added the following information:

    Datacaciques