eBay

High-Power 2-Channel Line Out Converter: The NVX XLCA2 is a 2-channel line out converter designed to improve your car's audio system by converting high-level speaker signals to low-level RCA signals for use with aftermarket amplifiers. It handles speaker-level inputs of up to 400 watts RMS, allowing for seamless integration into almost any car audio setup.
xBOOST Technology for Enhanced Bass: Featuring xBOOST technology, the XLCA2 optimizes the bass response in your system, enhancing low-end performance and providing a deep, powerful bass experience with minimal distortion.
Selectable Auto-On for Efficiency: The Selectable Auto-On feature ensures that the XLCA2 only activates when your vehicle is in use, saving battery power and optimizing efficiency by engaging only when needed.
Remote Bass Control Included: The included remote bass knob allows you to adjust bass levels directly from the dashboard, offering convenient control over your system's low-end output while driving.
Versatile Output Options: With a 9.5V pre-out, 12V trigger out, and dual amplifier outputs, the NVX XLCA2 offers flexible installation options for complex car audio setups, ensuring compatibility with various amplifiers and audio systems.

Product description

Compared to a basic line-out converter, the preamp output voltage on the XCLA2 is exponentially higher. This higher preamp output will give you multiple benefits such as sending a clearer, less distorted signal to your amplifier. Also, you will be much less likely to amplify unwanted noise and you can set the gain on your amplifier much lower due to the higher quality signal coming through the RCAs.

With typical factory head units installed you will hear a noticeable drop off in bass at higher volumes. This is done to protect your factory woofers from being blown; however, this bass roll-off will become even more prevalent when using the factory head unit with aftermarket amplifiers and woofers. With the xBoost technology from the XCLA2. you will be able to put that lost signal back.

XBOOST Technology
High Voltage 9.5 Volt Preamp Outputs
2 speaker-level inputs
Remote Bass Level Control (Included) Signal Sensing 12-Volt Trigger
Speaker Level Input Accepts Up To 400 Watts RMS
Dual Amplifier Outputs

NVX digital bass enhancers are designed and engineered to reproduce extreme bass output in your vehicle! The NVX XLCA2 accepts speaker-level signals of up to 400 Watts RMS per channel from the factory head unit or amplifier.

With the xBoost technology from the XCLA2, you will no longer have to deal with a loss of signal when using a factory head unit. So you will no longer have to worry about any type of drop off in bass quality

The NVX XLCA2 uses signal-sensing turn-on technology. This actually will take the signal coming in, see it, and actually give you a remote output to turn on your amplifier. This also helps prevent turn and off on pops that you may experience with a basic LOC.

The XLCA2 converts speaker-level signals to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Enjoy maximum sound quality while retaining the use of factory volume and steering wheel controls.