This product is used Quantitative determination of human whole blood (venous blood and capillary blood) of total cholesterol(TC),high-density lipoproteincholesterol(HDL),triglyceride(TG) used only for daily self-monitoring, and its test results can not be used as a basis for clinical diagnosis, screening and instruction of drugs.

• Easy to Use - Easiest to operate 5-in-1 lipid test on the market with just only ONE small sample (35~40uL) to get your results.
• 5 Results from 1 Test - Provide only a small sample to get 5 Cholesterol results (Total, Triglyceride, HDL, LDL and TC/HDL). High quality test results are broken down to provide meaningful results you can depend on!
• Professional Grade for Home Use - Our device provides the closest and most accurate Cholesterol breakdown and analysis to a lab test from home! This lipid test kit will give you reliable consistent results that you can depend on.
• Two display units - The blood lipid meter has two display units: mg/dl and mmol/L, which you can switch between at will.
• Memory & Storage - Store up to 300 test results with date and time to keep track of your health. Check your 7/15/30 Day Average so you can monitor your improvements and even test your friends and relatives on one device.

The dangers of dyslipidemia:
01、caused by cardiovascular and cerebrovascular diseases and its mortality rate has exceeded the cancer ranked first.
02、one of the important factors leading to atherosclerosis.
03、is an independent risk factor for coronary heart disease and ischemic stroke.
04、there is no obvious symptoms, but once the onset of the disease may cause injuries 04 disability or death.
05、Complications such as diabetes, hypertension, liver disease, etc.
06、Triggering systemic diseases.

Q＆A:

Why does the test result show HI/LO?

Test results exceed the upper/lower instrument test limits due to incorrect operation

Solution:

1. Insert the correct code card and make sure the code matches the test strip code

2. Ensure that enough sample (35uL~40uL) is added to the test

3. Use alcohol to sterilize during sampling (avoid iodine)

4. Please dry your fingertips with alcohol when taking the sample

• Test bereich:

① Tc: 2.59 mmol/l-12.93 mmol/l

(100mg/dL-500mg/dl)

② Tg: 0.51 mmol/l-7.34 mmol/l

(45mg/dL-650 mg/dl)

③ Hdl: 0.39 mmol/l-2.59 mmol/l

(15mg/dL-100mg/dl)

④ Ldl = TC-HDL-TG/2.2 mmol/l

(TC-HDL-TG/5mg/dl)

• Type of samples: Capillaries Total blood test, venous blood

• Dosing samples: approx. 35-40 μl

• Storage capacity: 300 groups

• Test time:<2 minutes

• Analyzer live: 5 years

• Test strip expiration date:

Unopened test strip expiration date (18 months)

Expiry date of test strips after opening (3 months，10 test strips/bottle) Once opened, the test strips must be sealed and stored properly,Please tighten the cap.

Precautions during testing:
1. Sufficient blood sample should be drawn in one go. If the blood sample is insufficient, do not add a second sample to increase the blood volume; the test strip must be replaced and the test repeated. (The blood volume must reach the black line on the collection tube.)
2. Check the blood collection site for sufficient blood flow, clean with hand cream, and do not use iodine-containing disinfectants. Increase blood flow by warming and rubbing the fingers.
3. If blood flow is insufficient, do not squeeze the finger excessively to draw blood; a second blood sample must be drawn. Excessive squeezing can cause excessive tissue fluid to mix with the blood sample, resulting in significant deviations in the test results.
4. Before inserting the strip, check that it is normal and that the test well membrane is free from severe misalignment, stains, etc.
5. Ensure that the blood drop symbol flashes before adding the sample. Otherwise, the test results will be inaccurate.
6. After the test begins, do not operate the instrument buttons, move the instrument or the test strip until the instrument displays the test results.

Purchase Notes:

1. Errors in Blood Lipid Testing Instruments:

Both home-use testing instruments and hospital test results will have a certain degree of error. The error range is within national standards, and if the test is performed according to the normal instrument operating procedures, the difference in results will be minimal.

2. Reasons for Excessive Errors in Test Results:

A: Improper operation. Strict adherence to the standard operating procedures is required.

B: Blood lipid levels change dynamically at different times. Instrument data must be compared with data from a hospital test report taken on the same day for the data to be valid.

note：If you select the option "（without meter）only 20 test strips," then this option does not include the instrument; it only includes 20 test strips. The test strips require the instrument to be used. Thank you!

Product List:（Meter + 10 lipid test strips）

① Analyzer*1

② Lancet pen*1

③ Test strip*10

④ Lancet*10

⑤ Blood collection tube*10

⑥ Storage bag *1

⑦ English User Manual *1