







Product Parameters:
Model: OC-H09A
Maximum Head: 6±0.5M
Maximum Flow: 12L/MIN
Voltage: DC12V/DC24V
Rated Current: 1.35±5%A
Rated Power: 16W
Working Noise: ≤35DB
Power Interface: Big 4-PIN
Speed Measurement Interface: Small 4PIN
Sealing: ≧ 0.2Mpa
Operating Temperature: -15~60℃
Inlet and Outlet: G1/ thread
Bearing Material: Ceramic
Pump Body Material: Aluminum alloy +POM
Dimensions: 63.5*62*56mm (Length * Width * Height)
Design Life: 30,000 hours
Color: Black
Working Principle: Centrifugal pump
Circuit Design: Three-phase brushless DC circuit, MCU control
Tip:
In order to create a good heat dissipation system after the installation of water cooling loop, please follow the following instructions before adding water cooling liquid:
1. When filling the water-cooled liquid, it is necessary to start the pump power repeatedly for several times. This repeated switching action can facilitate the water cooling liquid into the loop,and it pushes the air out.
2. Do not idle the pump! If there is no water cooling liquid, turn off the water cooling pump power immediately to avoid water pump damage.
3. Injecting water-cooled liquid from the top cover of the water tank can reduce the probability of air entering the pump and prolong the service life of the pump.
Attention to buyer:
The after-sales guarantee period for the product is seven days. If there are any problems or questions, please contact us. Timed out will cancel this service.



