• Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. If you are not sure if this model is right for you, please feel free to contact us.
  •  
  • Suitable for:
  • Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting.
  •  
  • Features:

    • ALL-CARB 6× 250-444 CA Wedge Type Quick Change Tool Post Set for 14" - 20" Swing

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Suitable for:

    Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting.

     

    Features:

    Made of high quality Alloy tool steel 40Gr which is forged and has longer life, not Aluminum. Precision ground and hardened.
    Takes only a few seconds to change tools.
    High quality 10.9 grade galvanized screws which have 1 time longer life than others.
    Tool Post and Tool Holders No. 1, No. 2, No. 4, No. 7, No. 10. 
    No. 250-401 Turning Tool Holder , use tool bit 1/2~ to 1"
    No. 250-402 Boring,Turning Tool Holder, use tool bit up to 1" and round shank boring bars up to 13/16"
    No. 250-404 Heavy Duty Boring Bar Holder, can use both 1 and 1-1/4" shank boring bars
    No. 250-407 Parting Blade Tool Holder, use 7/8" high parting blades 
    No. 250-410 Knurling and Turning Tool Holder,  use short tool bit 1/2~ to 1"
    Wedge type tool posts are precision engineered to assure repetitive accuracy.
    Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances.
    Maximum rigidity for chatter free performance.
    Completely sealed for maintenance free operations.
    Height adjustment screw allows accommodating various center height of different lathe chuck.

    Quick Change Tool Post Category: Quick Change Tool Post Sets
    Quick Change Tool Post Series: CA
    Lathe Swing: 14"-20"
    Quick Change Tool Post Type: Wedge
    Number Of Pieces: 6

    Hex Key Size: 1/4”
    Set Screw Thread Size: M12×32

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!               

     

    Includes: 
    1PC 250-444 tool post holder

    1PC 250-401 holder

    1PC 250-402 holder

    1PC 250-404 holder

    1PC 250-407 holder

    1PC 250-410 holder

     

     


    Item Specifics
    Country of Origin United States
    Brand ALL-CARB
    MPN MOT5437694
    Material Steel
    Quick Change Tool Post Category Quick Change Tool Post Sets
    Quick Change Tool Post Series CA
    Lathe Swing 14"-20"
    Quick Change Tool Post Type Wedge
    Number Of Pieces 6
    Hex Key Size 1/4”
    Warranty 1 Year
    Set Screw Thread Size M12×32

    Payment
    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Shipping
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Returns
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.
    Feedback

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    ALL-CARB 6× 250-444 CA Wedge Type Quick Change Tool Post Set for 14" - 20" Swing

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Suitable for:

    Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting.

     

    Features:

    Made of high quality Alloy tool steel 40Gr which is forged and has longer life, not Aluminum. Precision ground and hardened.
    Takes only a few seconds to change tools.
    High quality 10.9 grade galvanized screws which have 1 time longer life than others.
    Tool Post and Tool Holders No. 1, No. 2, No. 4, No. 7, No. 10. 
    No. 250-401 Turning Tool Holder , use tool bit 1/2~ to 1"
    No. 250-402 Boring,Turning Tool Holder, use tool bit up to 1" and round shank boring bars up to 13/16"
    No. 250-404 Heavy Duty Boring Bar Holder, can use both 1 and 1-1/4" shank boring bars
    No. 250-407 Parting Blade Tool Holder, use 7/8" high parting blades 
    No. 250-410 Knurling and Turning Tool Holder,  use short tool bit 1/2~ to 1"
    Wedge type tool posts are precision engineered to assure repetitive accuracy.
    Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances.
    Maximum rigidity for chatter free performance.
    Completely sealed for maintenance free operations.
    Height adjustment screw allows accommodating various center height of different lathe chuck.

    Quick Change Tool Post Category: Quick Change Tool Post Sets
    Quick Change Tool Post Series: CA
    Lathe Swing: 14"-20"
    Quick Change Tool Post Type: Wedge
    Number Of Pieces: 6

    Hex Key Size: 1/4”
    Set Screw Thread Size: M12×32

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!               

     

    Includes: 
    1PC 250-444 tool post holder

    1PC 250-401 holder

    1PC 250-402 holder

    1PC 250-404 holder

    1PC 250-407 holder

    1PC 250-410 holder

     

     

    Item Specifics
    Country of Origin :United States
    Brand :ALL-CARB
    MPN :MOT5437694
    Material :Steel
    Quick Change Tool Post Category :Quick Change Tool Post Sets
    Quick Change Tool Post Series :CA
    Lathe Swing :14"-20"
    Quick Change Tool Post Type :Wedge
    Number Of Pieces :6
    Hex Key Size :1/4”
    Warranty :1 Year
    Set Screw Thread Size :M12×32


    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.

    On Apr 10, 2026 at 19:53:13 PDT, seller added the following information:

    Datacaciques